Turbolark

I have been out with this car and it is top notch sucks your selling it.

Hey Brian. Yeah..business has taken a turn for the super bad. I was planning to be out with you all for Halloween, but it doesnt look like it will happen. If I still have the car, and can find a trailer to borrow I may be able to come up for a day and a half or so. We shall see.

FULL CROMOLY CHASSIS W/ CUSTOM REAR CAGE FOR MORE GROUND CLEARANCE

EXTRA BRACING ADDED FOR SAFETY AND STRENGTH

20+ INCHES OF TRAVEL FRONT AND REAR

FOX BYPASS AND COILOVERS AT EACH CORNER

2” HOLLOW FRONT SPINDLES

PRO AM 4 PISTON BRAKES FRONT AND REAR

FULL STAINLESS HARDLINE BRAKE LINES, WITH STAINLESS BRAIDED FLEX LINES

CHARLYNN POWER STEERING WITH SWEET PS PUMP

FULL ALUMINUM BODY PANELS, BY JONES FABRICATION IN UPLAND,CA

SIDEPANELS, HOOD, FIREWALL, DASH, FULL CENTER CONSOLE

FULL ROOF, ROOF WING WITH LED TAIL/BRAKE LIGHTS

REAR SIDE BEAUTY PANELS

MENDEOLA S5 FIVE SPEED SEQUENTIAL TRANSAXLE

934 CV JOINTS WITH CUSTOM 300M AXLES

LS2 6.0L ALL ALUMINUM ENGINE - 560+ HP

CUSTOM GRIND CAM, F.A.S.T. INTAKE W/90MM THROTTLE BODY

H-BEAM RODS AND MAHLE FORGED PISTONS

FULLY CNC PORTED CYLINDER HEADS - 11-1 COMPRESSION, RUNS ON 91 OCTANE PUMP GAS

FULL CUSTOM WIRING, INCLUDING 4 POSITION INCAR HEADSETS, IPOD READY.

1 PAIR OF HID LIGHTS UP FRONT. CAR INCLUDES A 4 PLACE LIGHTBAR(NO LIGHTS) AND A ROOF RACK

PADDLE TIRES ON BEADLOCK WHEELS

BFG MUD TERRAIN DESERT TIRES ON PROCOMP BEADLOCKS- 35" rear, 33" front

$42,500 OBO

CALL PHIL AT 909/210-2440

according to ricky wright there a replacement for the 2d and the internals used are more compareable to the s4. if thats the casw with a weddle r&p you could run more ponies without the length problem the s4 has

And they are supposed to shift like butter! I ws going to get one for my DD car, but i found the S5 instead for a steal.

Hi my name is Kevin. I have been reading about the manafold. Like all of you I want the most out of my motor. I have a ls1,I bought from cbm 450hp. This is my 3rd season on the motor.I have stroke it last year,this year I put a set of cnc heads,cbm's hot cam,42 pound Injetors,92mm throttle body. I'm taken the car to cbm on friday to put on the dyno. I hope it comes together after that. Itook it out for thanksgiving and didn't feel much more power. Was thinken about a blower?

So you have a stoker LS1? What, 383cubic inch now right? You also did a cam, heads and intake and you cant feel any more power? Should be a huge difference. Di you have Chris tune it after the parts went on or is that what the trip to CBM is for now?

hey turbolark hows the new car ??

Awesome!!! Needs more power though..LOL.

$900 for 15-20hp seems like that's REAL expensive.

It is. Thats why I found one that was on a turbo motor and cracked. Paid 200.00 for it and epoxied the crack for 5.00.

The LS6 intakes sell usually for 300.00 without the fuel rails etc...used.

The truck intake flows like crap. Total waste of money to actually pay for one. If you had it already, then fine, but dont buy that POS. If you want to increase some power, get the LS6 intake. Or at least an LS2 intake. The LS6 will allow you to use your current stock 78mm throttle body. The LS2 allows you to use a 90mm throttle body for more flow. I have 2 different intakes. The one on the car now is an aluminum intake made by Professional Products. Adds some weight to the car over the plastic ones, but it allowed me to go inside and do some porting. You can only port the insides of the factory plastic intakes by cutting the bottom out of them. I also have a 90mm F.A.S.T. plastic intake. It's the best available, but quite alot of money($900.00). I will be swapping the FAST intake onto my car, hopefully picking up another 15-20hp.

Here are a couple vids jumping near Comp. Had a great Tday feast camped with Big Al's BBQ!!

<object width="425" height="344"><param name="movie" value="

name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src=" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

<object width="425" height="344"><param name="movie" value="

name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src=" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

Some pics from the weekend.

Trash left over from New Years weekend we cleaned up.

Saturday morning.

My daughters first buggy ride.

Her first time on a quad...on the leash.

Out for a ride. Me on the left, Al T in the middle, and Shawn Jones from Jones Fabrication on the right.

And finally a good one of my car.

Hope they dont load too slow. Sized them down by 50%.

Phil

Its was a great weekend And Still not over yet My Baby girl showed up Sunday Morning Shes 9 month prego we went for a ride Nice and Slow she went back to Camp Sleep for about 6 hours while we played Pack up about 4:00 pm Arrived Home at 8:00 pm She took a shower and Went in to Labor Arrived At Hospital in Anaheim at 11:00pm on sunday as we Speak now she is Having A Baby Monday 24 hours later Ya My Baby is having a baby

Kylee Ann rey Tomblin Born on 1/22/08 at Approx 10;pm Grandpa Al

But the Weekend was great we had a good time got to meet some good people Car run a little slow still need tuning and a few bugs worked out but It Was A GOOD Time :wedgie:

Congrats Al!! Hehe..Gramps. you buy a walking stick yet..LOL

I had a blast this wekend. First time to Dumont and was great to have almost all to myself! Also the first time out with th e car that I dont have to do engine work, although I do have to replace my rear arms I bent from jumping at the bottom of comp.

Was nice to meet some of you, although I cant remember names, but I see the faces in the pics. For those that dont know me, my car is parked on the pass side of the blown Ghost Rider themed car, and I'm the fat guy sitting on the tire that shouldnt be wearing a white shirt..LOL

:freakin_nuts:

This weekend will be a bunch of firsts for me.

First time to Dumont, first time with a Moho, first time with wife and kid, first with powdercoat, first with Mende 2d, first with new turbo and hopefully first trip without having to rebuild the car afterwards..LOL Oh yeah..first post here for me. Hi everyone!

Keep an eye out for me, and catch me if you can! Chassis is silver now, running a pirate flag.

Phil