Jump to content

Raptor1000R

Members
 View Profile  See their activity

  • Posts

    19

  • Joined

  • Last visited

 Content Type 

Everything posted by Raptor1000R

  1. Raptor1000R
    Ready to go!
  2. Raptor1000R
    2019 Yamaha YXZ with Just over 500 miles on it! Full motor build by K&T Performance. Just under 500hp to the wheels on E90 on level 4 Level 2 was 314 on Level 2. Has 4 different boost levels CNC Ported head with +1mm SS valves, HD springs w/ Tie Retainers, valve seals, HD Cam Buckets with receiver groove for valve shim. High Lift Billet Cams YXZ Forged Rods, Pistons and Head Studs New injectors and Tuned for E90 Turbo System with Precision Upgrade, Tial upgrade. Blow off valve, 46mm Precision Wastegate Motec Fuel Management tuned by Cody Phillips Oil Cooler Manual Chain Tensioner HD Drive Shaft HD Billet Inner Clutch Hub Packard Performance Billet Rear Diff Packard Wheels with Blackbird Paddles(not in the pictures) Turner Axles NXS Titanium Long Travel kit Completely redone shocks by Matt at Desert Speed Lock-up clutch RSK Cage Custom Velour Seats Billet Packard Shifter Packard Headlights Custom Wrap I am sure there is stuff i am missing but this care was originally built to run in the Sand Outlaw Series Races. I have never even had it past level 2 and it is crazy fast! I had the shocks and suspension set up for dunning and racing so it is a very fun car to drive. Asking $49500 385-456-5977
  3. Raptor1000R
    2014 Polaris RZR with Turbo Apex Motor Apex has Rods, Pistons and Head Studs Turbo and intercooler Boondocker Controller Adjustable Boost Custom Clutches Custom Roll Cage and Roof STU Paddles & Skat Fronts Heretic Headlights Thanks for looking! $16250
  4. Raptor1000R
    2014 Polaris RZR with Turbo Apex Motor Apex motor has Rods, Pistons and Head Studs. Turbo and intercooler Boondocker Controller Custom Cluthes Upgraded Roll Cage STU Paddles Heretic Headlights 801-376-0757 Thanks for looking!
  5. Raptor1000R
    If you have any questions give me a call 801-376-0757
  6. Raptor1000R
    Custom built RZR 4 with Yamaha Turbo APEX Motor! Conversion was done by MCX. (Cost over $15000) The motor has recently built with Carrillo Rods, Pistons and Head Studs. ($4500) New GT 3076 Turbo and intercooler installed by Packard Performance. ($2000) I have been told by guys in the snowmobile world that the motor should handle 550 HP to the crank. We have only ran it at 8 lbs of boost and it pulls HARD!! The RZR has after market power steering and 29" tires off a 1000. Custom STM Clutches on both the Primary and Secondary. The plastic is in great shape! The 4 wheel drive works perfect. It has 2 seats but everything is there to install the back seats. I also have the MCX turbo kit that came with the motor conversion. (about $3500) Asking $20000/obo I have over $30000 into this bike. RZR is for sale locally so I reserve the right to end the post at any time. Possible trade for RZR 4 1000 Thanks for looking. 801-376-0757
  7. Raptor1000R
    Price lowered to $14700.
  8. Raptor1000R
    This is an amazing Drag Bike! It has a 1300 cc Turbo Hayabusa motor in a Custom DS 650 Chassis. The motor has rods, pistons, race tranny and a Scott Horner Turbo system on it. The motor has dyno'd over 500hp in a motorcycle at 25 lbs of boost. We are running 10 to 12 lbs boost and about 280 to 315 hp in the quad. See it in action on Youtube The bike has a +12' Swingarm, plus it is stretched +3 in the front. It has 16 paddle Rippers and buff front tires. This bike has been the fastest bike at Sand Mountain, Utah for the past 2 seasons!! Over $11,000 in the motor and turbo alone! Get the bike now for $15,500/obo Call with any questions? 801-376-0757
  9. Raptor1000R
    This sand rail was built by Joe Fab. It is a 5 seat Long Travel Sand Limo car with a 2.5 Turbo Subaru motor and Meneola 2D Tranny. It has King shocks on front and dual Kng Shocks on the back. The Motor was built by Outfront Motorsports and has their closed deck block(Exclusive Outfront Closed deck block insures the integrity of motors that are 350HP or more. $800 exchange), High strength forged H style rods are the backbone of a reliable race motor. Outfront offers the best shot peened 4340 rods on the market for 48mm journals. $500 per set of 4 without bearings and High performance JE pistons to Outfront specs withstand the tremendous heat that can be generated in high boost motors up to 30psi boost. $550/set of 4. Rings $110/set of 4. This motor on the web site starts at $16000 by itself! I don't know a lot about these cars but I took it out to sand mountain and know that it is to fast for me! lol It does have some switches that I don't know what they do? I got this car in a trade deal and don't know that much about it. I was able to contact the original owner and get info on the motor and frame build. He was personal friends with Joe Fabb, owner of Sand Limo who built the car. If you have any questions, just ask and I will do my best to find the answer! 801-376-0757 Might be willing to trade? (Rzr4, Crewcab truck, silver, guns) Let me know what you have. Thanks!
  10. Raptor1000R
    $9800 This bike is amazing!! It is a DS chassis with a Suzuki Hayabusa motor in it. The motor was a brand new crate motor! This is one of the cleanest motor swaps I have ever seen! Has +10 chrome swingarm, chrome foot pegs, shifter and brake pedal and chrome gauge cover. The engine is a 175 hp Suzuki Hayabusa 1300. One of the best most powerful and reliable motors you can buy. It has Razor back front tires and 24" 12Paddle Skat Trak Rippers. Paddles are almost new. It has been converted to a thumb throttle so you can keep control of this monster at the dunes. Bike was purchased for over $15000 from the original builder about 2 years ago, but times are tough and I don't need 3 bullet bike quads so here is your chance to own an awesome bike!! 801-376-0757 Very custom bike. Professionally built, no expense spared. Very fast, very reliable!! Must see!
  11. Raptor1000R
    This bike is amazing!! It is a DS chassis with a Suzuki Hayabusa motor in it. The motor was a brand new crate motor! This is one of the cleanest motor swaps I have ever seen! Has +10 chrome swingarm, chrome foot pegs, shifter and brake pedal and chrome gauge cover. The engine is a 175 hp Suzuki Hayabusa 1300. One of the best most powerful and reliable motors you can buy. It has Razor back front tires and 24" 12Paddle Skat Trak Rippers. Paddles are almost new. It has been converted to a thumb throttle so you can keep control of this monster at the dunes. Bike was purchased for over $15000 from the original builder about 2 years ago, but times are tough and I don't need 3 bullet bike quads so here is your chance to own an awesome bike!! Very custom bike. Professionally built, no expense spared. Very fast, very reliable!! Must see!
  12. Raptor1000R
    No, nothing but hill shooting on this bike!
  13. Raptor1000R
    That a good idea, I'll give them a call today. Thanks!
  14. Raptor1000R
    Hi, I have a DS650 with a Turbo Hayabusa in it. The front end sits really high and I would like to lower it down. i have been looking at getting a shorter shock in order to lower it. Does anyone know if the Fox Floats would be a good shock for this bike? How do they handle the whoops at the bottom of the hills? My other option would be Marvin Shaws? Does any one have an idea what would work best on my bike? Thank for your help!!!
  15. Raptor1000R
    Awesome! Thanks! I don't have any pics yet but as soon as I get the new swingarm on i'll post some.
  16. Raptor1000R
    Does anyone know if it is possible to run a thumb throttle on a bullet bike motored quad? I have a Raptor with the GSXR 1000 and would much rather have a thumb throttle on it for hill shooting. Any help would be great!! Thanks!
×
×
  • Create New...