iweb

Still available, save me from the Craigslist trolls!

Hello everyone, its been a while since I have been on. A few years ago the wife rolled her KFX700 and knocked the wind out of her so she won't go on the dunes anymore so I sold all the sand toys. I just bought this hauler and due to family issues need to sell it to get the cash back.

2006 WW 30' 5th wheel toyhauler SL 3005 Super Lite.

Queen main bed, 2 fold down beds, and 1 pull down bed by back door.

4k Onan built in generator, fuel station, rear screen door.

13.5' to first cabinet and I loaded my stock Rhino with big mud tires.

Everything works except motor on landing gear won't raise it, missing fender on one side from tire blow out.

I need the $15,000 so firm at that price and no trades. Located in Pahrump.

$2550 OBO.

OBO!

I just traded for this bike and I am way too old and too short to ride it so it is up for sale. The info below is from the guy that I got it from and is all that I know about it. Located in Pahrump.

4 hrs on motor rebuild, pro taper bars, gpr stabilizer, hand guards, 3.4 gallon Acerbis gas tank, trail tech computer, Recluse anti stall clutch, z start pro, sfb clutch cover, Devol radiator guards, Devol rear disk guard, ricochet skid plate, black warp 9 rims with 18" rear, Uni air filter, d1h top clamp, rental sprockets, pro circuit pipe, Utah title signed off by dealer.

If interested email me at iweb22@gmail.com

Swains Creek lot and Meadow View cabin are both listed with real estate agent and both reduced to $129,900 each. Still considering trades as part payment.

Winchester model 70 7mm Remington Magnum with synthetic stock and Simmons 3-9x40 8 Point scope plus 62 rounds of ammo. Guy I got it from said it's been fired 3 times.

$600 firm in Pahrump and I will ask to see your ID and have you sign my bill of sale.

Pic: http://lasvegas.back...7mm-mag/5321063

VW 2007cc stroker motor, turn key plug and play with single Del carb, dual exhaust, clutch, alt, remote oil cooler and filter, low hrs, built by famous local vw shop before he was computerized so no info on parts used, $2250

I need 2 14" ST rated tires for a trailer.

1975 2 bedroom 2 bath dble wide mobile home on fenced 1 acre lot. 2 car garage, garden area, paved streets, close to Hospital, electric water heater and range, propane heat. Mobile is too old to qualify for new land/home loan.

Asking $70,000 and it has a first mortgage of approx $38,000 at $525 per month that might be assumable with note holders ok but does have a due on sale clause. Will trade part or all of my equity for car, truck, rv, Harley, guns, gold, silver, ? or may carry a second.

Current renter gave notice and will be out 5-15-11. Address is 230 Woodchips and is one block south of Basin, rent is $650.

Yep still here.

Cool thanks for the info! I am looking at trading for this: TRADE

Working on a trade with a guy in 29 Palms, what is the best route to get there dragging a car hauler?

Yep, I will post sold when it sells.

Just mentioned this to my folks who's looking to retire somewhere in the lower 48's

Thanks and I still have 3.99 acres on a remote lake in Alaska for sale!

Reduced to $150,000 and I have a 1 bedroom 1 bath plus loft log sided furnished cabin in Meadow View at Duck Creek for sale for $159,900.

Lot Pics

Cabin Pics

Not at the top of my list but thinking, I will let you know if interested.

No thanks on the s10, really need a car or mini van for the wife to drive, had to sell her car to get rid of the payment and now she drives my dsl truck!

what about a 1983 26ft sleekcraft ambassator ?

No thanks not into boats.

Is it still available

Yep, I will post sold when it sells.

1964 VW bug with Baja kit, bus gear reduction that was never completed, car is 6 volt, tires flat and won't take air, glass good, interior bad from sitting for years, fenders are just sitting on in pics and need to be bolted on, clean NV title which could be used on Manx and no smog. Don't know if tranny is good as I got this as a project with the motor not installed. Also have 1200cc motor that came with it for $250 more.

Thanks for the info, I will pass it on. The used tranny was from a pvt guy.

Yep thats the one, my son wants to buy it and put in a motor so I guess cheapest is the plan. He bought the 2002 GMC in my other post, the tranny was bad so he bought a used one, put that one in and it blew after one trip to Vegas.

Looking to buy a set of 4 17" tires load range E for my 05 Dodge 3500 SRW, 265-285/70R17.

And I need 2 P265/60R18 tires for my Aspen.

What is the price of a crate 1996 Chev. 5.7L motor? What about finding a shop to rebuild one?

Looking at a truck that has over 300k miles and one cylinder is dead.

A buddy of mine cooled a 5,000 sq ft house with 2 of these and his power bill went from over $500 to $100. So I bought one this summer and I cool my dble wide mobile with one and my power bill went from over $400 to just over $100. Doesn't work too good when it is humid as will any swamper and I have only used my a/c twice this summer.

Found out the vibration is input shaft seal/bearing or whatever he called it.

I bought a used tranny and the guy said it works perfect when its cold but shifts hard when warmed up. I talked to a local tranny shop and he says shifting hard means it is shot and needs a total rebuild. PO also said he took the truck to a tranny shop and the computer showed a code with a sticking valve or piston, he couldn't remember exactly what was suppose to be sticking.

If my son puts in the "new" tranny to see how it works does the tranny need to be pulled to fix the sticking valve thingie or can just pulling the pan work to fix it?

What do you guys say?