Raptorman84 Posted March 25, 2017 Share Posted March 25, 2017 (edited) I have a mid travel 4 seater honda v6 rail with 10" fox 2.0 emulsion coilovers in the back. When i go over whoops the bump stops are hitting. My springs are rated at 300 lbs and the nuts are tightened about half way down. Should i tighten them down more or get a heavier rated spring? Just cant get bigger shocks so i want to try to work with what i already have. Edited March 25, 2017 by Raptorman84 Typo Quote Link to comment Share on other sites More sharing options...
dunefreak Posted March 28, 2017 Share Posted March 28, 2017 If you tighten your pre-load down more, that will only give you more ride height and will most likely cause it to buck in the whoops. A stiffer lower spring would be a possible solution (or bandaid) but it sounds like you need more compression dampening in the shock (or both). Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.