jwcarguy

video clip

dam iphone, recorded sideways!!

IMG_1685.MOV

I have someone that is looking at my 2006 DD/ Buggy Works car and has a engine already

so.... this is basically a feeler ad for the complete engine package w/ harness & tuned pcm, adapter plate, flywheel, clutch setup in my car, if the buyer buys it without engine

car ad: http://www.glamisdunes.com/invision/index....howtopic=322069

It only has approx 8 trips on this engine, yes it is a iron block engine (stronger and only 73 Llbs more than a aluminum block) difference of having alittle kid in the back seat as far as weight!

here are the specs. / details on it

- LQ iron 6.0L (approx 490hp), rebuilt short block std bore(8 trips ago)

- #243 (LS6) cylinder heads w/ PRC .650" dual springs w/ tia. retainers

- Texas Speed 228R cam

- TSP .080" 7.400" pushrods

- GM LS2 HD timing set

- LS7 lifters w/ LS2 lifter trays

- LS6 intake w/ 36# injectors & ported/ polished throttle body

_ARP head bolts, Harmonic balancer bolt, header studs

- Melling #10295 oil pump w/ GM LS2/3 Corvette center sump oil pan with internal baffling

-GM #411 pcm with tune by Texas Speed (approx hp @ crank, no dyno #'s)

- truck accessory drive w/ modified p/s pump reservoir for Charlyn return line

- Doug Thorley headers

- Gen III harness modified by S&S Performance as standalone setup

- CBM / K&N cone air filter with Outwears prefilter

- 90 degree mold intake hose

- Grantelli Performance Mass Air Flow Sensor

- AC Delco Corvette fuel regulator/ filter

also has adapter plate, just resurfaced flywheel, R&H Pressure plate fresh and new Kennedy clutch disc, new large GM pilot bearing 0 trips, just pulled into toyhauler

I attached a video of it at the bottom of ad, below pics

in Las Vegas

(702)677-4085

Jeff

^^^^Agree. Good luck with the sale !

Thanks guys!

4/23/15 FIRE SALE!!! Need funds for house purchase now only $26,000

I have a full set of (4) rims and tires for a sand rail or VW buggy with wide 5 bolt pattern (5 x 205mm)

The front pair of CMS spun aluminum .190 wheels polished wheels 15 x 5.5 with Mickey Thompson Baja Pro 33 x 9.00-15 tires

The rear pair of CMS (Custom Metal Spinning ) spun alum. .190 polished wheels 15 x 7.5 with BF Goodrich Mud-Terrain ( BFG MT ) 33 x 10.50 -15 tires

both rims and tires are in great condition, not damage (dents or bends) came off a Tatum Motorsports sandrail http://www.tatummotorsports.com/store.php

Bought for a offroad rail project, but need the cash more right now

Asking $650 obo SOLD!!

call/ text/ pm (702)677-4085

no, sorry they are sold

I will edit the ad

Jim,

No, sorry, I don't know Chris

Jeff

No, I found a better buy on a LS7 for my buddy

Who is Chris Lamb?

I am posting this for a friend of mine here in Las Vegas, please contact Jerry with any questions

I have a low mileage LS2 engine with 35k miles in it. The motor is a 6.0L LS2 bottom end( hd crank & connecting rods w/ floating pin pistons) with a LS3 top end (new GMPP cylinder heads and LS3 intake manifold setup).
I was building this motor for my 1969 Camaro, but changed directions and decided to use an LS7 instead. This motor would also be great in a sand rail or hot rod. Estimated crank hp is 550. It is a Gen IV motor with a 58X reluctor wheel.
It does not include a wiring harness, computer, fly wheel / Flex plate starter etc.

- The cylinder heads are brand new #823 castings from GM Performance Parts (part #12629063) and have thehollow sodium filled valves
- Comp Cam for rectangle port cyl heads specs: 229/236 dur 623/617 lift 112LSA
- 12 Point head studs
- GM MLS head gaskets
- PAC #8401 Dual "Gold" Valve springs kit with titanium retainers.
- Comp Cams Trunion upgrade on the Rockers
- .080" Wall 7.4L Chromoly Pushrods
- new GM LS7 Lifters & lifter trays
- Pistons have been fly cut on intake side for the cam
- New take off LS3 intake setup with LS3 42# fuel injectors & fuel rails and beauty cover
- New take off water pump
- Corvette balancer
- ARP harmonic Balancer bolt
- Corvette LS3 oil pan (center sump, shallow pan)
- Taylor spark plug wires
- LS3 coil pacs with harnesses & brackets
- LS2/3 vented pcv valley cover
- LS3 coolant steam port line



Asking $4500 SOLD!!

Call or text Jerry (712)253-7583 note that the area code is 712 and not 702. I live in Vegas but still have an Iowa phone number.

I have 4 used Tiger brand 3pt harnesses for auto, utv or sand rail / dune buggy

BLACK 3X2 3 POINT TIGER SEAT BELTS WITH LATCH AND LINK STYLE BUCKLE

I great condition

Asking $45 ea OBO

Also have (1) Crow brand 3pt black 3x2 harness with sewn in shoulder pads in great condition

Asking $70 obo

call/ text (702)677-4085

I have some Kings shocks that I am not using on new chassis

-a pair of King 2.0 x 10" coil overs with 7/8" shafts & remote reservoirs, dual rate hardware and King springs 350# over 400# $750


- a pair of King 2.5 x 16" double bypass shocks with piggy back reservoirs, with rubber bump stops $900

they are in great condition, no damage
lower shock end blue is wore off on front side of bypasses from sand


Here are pics when they were on my old car that is for sale

I removed them to use on new chassis, now having to go to different shocks on it


Will be headed to Barstow early Sunday (3/22) morning and could bring with me

In Las Vegas

call/ text/ pm (702)677-4085

Just bought a new chassis and want to use the seats from my red DD/ Buggy works car in new car, so have to find a economical set of front buckets and rear 48" back seat (just like the ones that I sold 6 months ago!!) so I can get my car listed up for sale (Unfortunately I sold them off when I was going to install 4 buckets, in the red DD car)

preferably gray cloth or tweed

Probably Race Trim or Beard like was in it, prior to going to sell car

Tab dims: front 14 x 18

rear 15 x 42

Please let me know what you have, location and prices

I am in Las Vegas

pm/ call/ text (702)677-4085

Thanks, Jeff

short video just after reinstalling engine and trans after service

IMG_1685.MOV

Well the sad time has come to post our car up for sale, that has been great to us for almost 6 years!

We bought a new car/ chassis that we are building, so one has to go

2006 Desert Dynamics / Buggy Works 5 seater

When we bought it, it was newly built by Dan (mtrsportdan) and Shawn Jones (Jones Fab.) (vin and titled/ Cert of Origin as a 06' Desert Dynamics) Main chassis , arms is from Dave @ Desert Dynamics

Over this time, the car has undergone numerous changes and upgrades

- the main frame is only "Buggy Works" part original (chromoly 1 1/2" frame) narrower than fullsize DD sand car, but has over double the rear seat leg room as DD sandcar

- the suspension was upgraded to the 2.0x 10" shocks that include the new lower a-arms for the longer shocks, new upper arms were built same as lowers (1 1/2" chromoly)
- rear 2.5x16" bypasses added along side the 2.5 x 14" coil overs (Kings in pics not on car, have new shocks/ springs all around)
- addition of longer & wider rear trailing arms from a DD car
- rear cage was remade and now is removable and not the ugly squared off back
- added 1/4" aluminum full skid plate under engine and trans

Addition of V8 engine and Mendeola 2D trans axle:
- LQ 6.0L (approx 490hp), rebuilt short block (8 trips ago)
- #243 (LS6) cylinder heads w/ PRC .650" dual springs w/ tia. retainers
- Texas Speed 228R cam
- TSP .080" 7.400" pushrods
- GM LS2 HD timing set
- LS7 lifters w/ LS2 lifter trays
- LS6 intake w/ 36# injectors & ported/ polished throttle body
_ARP head bolts, Harmonic balancer bolt, header studs
- Melling #10295 oil pump w/ GM LS2/3 Corvette center sump oil pan with internal baffling
-GM #411 pcm with tune by Texas Speed
- truck accessory drive w/ modified p/s pump reservoir for Charlyn return line
- Doug Thorley headers

Trans:
-Deco case 2D with all Weddle gear stack and ring & pinion (fresh 0 miles, always serviced by RC Trans), G50 inputshaft
- Weddle offset bellhousing and IMI hi torque starter
-Stage 4 clutch w/ 6 puc disc, flywheel & pressure plate just resurfaced, new GM pilot bearing
-934 cv's w/ 300m axles, Dual cv boot setup
- Pro Am billet shifter
- 33 spline microstubs

Brakes:
- 4 piston Jamar brakes rear, front 2 piston Jamar brakes wide 5 hubs
- Char-Lyn Power steering w/ Howe HD steering rack

Body:
-all aluminum by Shawn Jones (Jones Fab), full dash and gauges, interior panels vinyl lined
-full rhino lined aluminum floor pan
-full 1/4" aluminum skid plate under engine and transaxle
-Rigid Industries 40" combo LED lightbar and Dually D2 LED pods
- Rugged radios car to car, 4 person intercom system w/ digital upgrade, includes 4 person oth headsets

- - front "+2" buckets and rear bench

Cooling:
-Ron Davis radiator w/ twin 16" Spal fans in shroud
- SLP 160 degree thermostat
- all -20 AN stainless steel braided lines and fittings

Tires:
-full dirt tires (33" BFG & 33" Baja Pros on Centerline 15x7 rims )
-33' STU Blasters and 8.80 triple razors (tires only, no rims included)


car is located in Las Vegas

Asking $29,900 obo (no trades, thanks) 4/23/15 FIRE SALE!!! Need funds for house purchase now only $26,000 SOLD!!!

call/ text/ pm (702)677-4085

Thanks for looking, Jeff

I have a extra pair of lower front A-arms 1 1/2" chromoly tig welded for a 10" stroke shock

they are off a Desert Rat sand rail, but will fit other chassis like DD/ Buggyworks and others

please verify fitment (see pics for dimensions)

powdercoated gun metal metallic

asking $400 for pair SOLD!!


also have a pair of chromed Combo Spindles that fit the same Desert Dynamics, Buggy Works, Toyz for Big Boyz, Desert Rat, etc

they spindles are in great condition and come with aluminum spindle nuts

asking $250 for pair SOLD!!!

Parts are in Las Vegas

call/ text/ pm (702)677-4085

Thanks, Jeff

I have a new pair of King double bypass shocks 2.5x16" that have the optional chromed shock bodies and red anodized reservoir end caps and components

I got them for a new DD dual sport chassis, but I need to get 3.0x16 bypasses now

not sure on valving, bought them from a guy that had them for a approx 1800# 4 seater car w/ LS1 & Mende 2D

They are new and never have been charged

will sell outright or trade plus cash (from me) for a pair of King 3.0 x 16' bypasses

they sell for $1600+ new (with optional chromed shock bodies $125 ea and red anodized shock ends, rese caps and components $75 ea)

SOLD!!

in Las Vegas

pm/ call/ text (702)677-4085

Just bought a new chassis and want to use the seats from my red DD/ Buggy works car in new car, so have to find a economical set of front buckets and rear 48" back seat (just like the ones that I sold 6 months ago!!) so I can get my car listed up for sale

preferably gray cloth

Please let me know what you have, location and prices

I am in Las Vegas

pm/ call/ text (702)677-4085

Thanks, Jeff

Posting for a friend, please contact Jerry

2007 Weekend Warrior CL4005 5th wheel with dual slides (bedroom and kitchen). All standard and upgraded options including dual A/C units and fuel station. Flat screen TV in living room, rooftop satellite dish. Smooth Fiberglass Siding, 3 Axles with new heavy duty Michelin truck tires with warranty, 5500 Onan Generator w/ 20 Gallon Fuel Capacity, Fuel Station w/ 20 Gallon Fuel Capacity, 2 big RV Batteries, 10 Gallon Gas Water Heater, 3 Propane Tanks w/ 5 Gallon Capacity each, 19 Foot Awning, walk on roof w/ Ladder, Outside Shower, Spare Tire, Power Front Jacks with upgraded duel motor, Rear Manual Stabilizer Jacks, 150 Gallon Fresh Water Tank, Refrigerator/ Freezer, Convection oven/Microwave, LPG Gas Smoke Detector, Ceiling Fan, Front Queen bed, Sofa Sleeper, Dual Electric Rear Beds. Antenna, AM/FM Stereo, CD Player, Surround Sound System. Stand up shower with separate toilet area, Lots of storage. 2 captain chairs. 2 tables. This trailer is in excellent condition. Everything works and is ready to go. Private party and free and clear title.

Asking $28,000 9/29/15 Price Drop $25,500 SOLD!!

Jerry 712-253-7583 Note that the area code is 712 and not 702. I live in Vegas but still have an Iowa phone number.

this is a ad for people we know here in Las Vegas that had their 2013 RZR4 800 stolen a few weeks ago and are still looking for it

stolen in Las Vegas from Oasis RV park

Buyers beware last night this 2013 Polaris rzr 800 was stolen from us at Oasis RV park.
If seen please call. UP TO A $1000.00 reward leading to a successful recovery. Its a pretty obvious side x side orange and blue with orange wheels. Vin 4XAXE7EA3DF260753


link to ad their kids posted :
http://lasvegas.craigslist.org/snw/4690989699.html


please call if you have any info on this (702)358-4948

this is a ad for people we know here in Las Vegas that had their 2013 RZR4 800 stolen a few weeks ago and are still looking for it

stolen in Las Vegas from Oasis RV park

Buyers beware last night this 2013 Polaris rzr 800 was stolen from us at Oasis RV park.

If seen please call. UP TO A $1000.00 reward leading to a successful recovery. Its a pretty obvious side x side orange and blue with orange wheels. Vin 4XAXE7EA3DF260753

link to ad their kids posted :

http://lasvegas.craigslist.org/snw/4690989699.html

please call if you have any info on this (702)358-4948

I have a complete set (including spare) of 7 chrome spoke steel 15x7 6 bolt trailer/ toyhauler wheels with ST225/R15 load range E tires

the rims are 15" x 7" and have a 6 x 5.5 (6 x 139.7) 6 lug bolt pattern and include the decorative chrome full center caps that snap onto the lug nuts, allows easy removal for greasing the wheel hubs

The tires are in excellent condition (4 tires are brand new) All 7 tires have Lifetime Warranties from Discount Tire that are transferable
They are all mounted and balanced
retail to buy all rims, tires caps mount/ balance and warranty certificates is over $1500 + !!

Only selling due to installing new 16" wheels / tires on our toy hauler

For RV, travel trailer, toyhauler, cargo enclosed trailer, race car, sand rail buggy haulers w/ triple axle

Asking $950 OBO (for set of 7 wheels/ tires) SOLD!!!

in Las Vegas

pm/ call/ text (702)677-4085

I have a extra axle from my old setup that I came across while moving

for 930 cv 28 spline and measures 30" overall


I am currently looking for a 934 33 spline axle 28-29" long

willing to sell outright or trade

asking $100

in Las Vegas, NV


pm/ call/ text Jeff (702)677-4085

I am looking for one ( or pair) axle/ s that are min 28" overall for a 934 cv w/ 33 spline

doing off season maintenance and didn't like the look of one axle splines

please let me know what you have condition and price

shipped to Las Vegas, NV 89123

thanks, Jeff

(702)677-4085

SOLD!!

I have a pair of billet Sand Star aluminum rims with OMF beadlock and reinforcing rings

the rims are 15" x 6" 5 x 205mm bolt pattern with a 3.5" backspacing

Comes with all hardware

OMF beadlocks are top of the line

Rims are in great condition, could use a polish, dull from sand

Tires pictured are NOT included!!

One back reinforcing ring is dinged from a kid and a quad (you get the idea!) see pic

In Las Vegas

pm /call/ text (702)677-4085

$400 for pair SOLD!!