sincityshooter13

The XT2 and the RC10GT are both for sale, going in to the short corse trucks

Ive had several over the years but im down to 2, XTM xt2, and a associated rc10gt. dont have any current pics but the buggy has some money into it and the truck is for sale

Anyone else have any suggestions?

I need some beadlock type rings cut out. Just wondering if anyone knew of a good cnc, waterjet or laser cutting place in vegas

yup i have that one too, my friends kid gets mad because it copys him lol

My dream car... someday hopefully Looks amazing!!!!

we did the same thing a few weeks ago, opened a card with them, i run mine in the garage for when i work on my baja, but if i dont leave the garage half open the humidity builds up and it gets warm in there

started with a rolling bug, trying to make it a baja before oct.

we talked about strapping it behind the truck and pulling it through the neighborhood, but the lack of brakes might suck tonight we mounted the seats and bent up some tube for the sides should have pics sunday or monday

It rolls!! tomorrow i will have the seats mounted, and start building the mid part of the frame. :poop:

gonna work on mounting the seats and get the beam and torsion on it soon. here are my new seats "mastercraps" :poop: to me they look like these mastercrafts minus the stitching lol

hopefully it will all be worth it by the time dune season comes. I love building things, knowing and learning how things work, and being able to say i made that, mostly why i love working construction so much (if it would ever pick back up ) Ive also been working on mounting the bus trans in the bug torsion curious too see what you guys think of my welds, i just started welding in december I pulled apart the trans recently to replace the seal and bushings in the nose cone only to discover this nose cone damaged bearing destroyed so im in the process of learning how to tear apart the trans i picked up a new nose cone from RcTrans (really helpful people there)

Laid out the plans tonight and bent a few tubes. going to continue in the morning my seats will arrive tomorrow, he have decided to call them mastercraps... i will explain more when i get them

main problem is lack of funds, and not being able to make up my mind. I cant decide if i want a 1600 car or make a new sandrail similar to mine but wider. Im leaning toward a sandrail because it would be alot simpler and it would be ready by halloween.

how hard is it to take a home made trailer and get it registered, because i could whip up one of those in an afternoon otherwise i would have to buy a dolly, register it then extend it, but building my own would save a lot of cash.

after hours of of staring at my frame and several beers later we decided the best thing to do is get rid of the frame and start fresh. I love the look of the 1/2 1600 class cars, so i plan to build a two seater for the dunes with the look of a 1600 car. Its just a matter of finding out some dimensions so i can start bending some tube. Id like it to look similar to this car other than maybe different sheet metal work.'

yeah, seams i may have to go a different route for towing. I found this, basically its an extended tow dolly. http://www.woods-car.com/ttrailer.htm

Anyone know the laws in Ca and Nv for flat towing, im in the middle of deciding whether to build a new 2 seat frame or turn a bug into a baja, the bug has no title. and if i do the rail it would be homemade. I have no room for a trailer and no money to buy one. ive heard people say they flat tow there race cars with no reg/insur with no problems, and others say it has to be reg/insur. and i cant afford insurance on another vehicle. anyone?

WOOOOOO sold some parts, i can finally order my tube bender tomorrow

still waiting on the bender, but in the mean time, I cut the rear end out, picked up a new rear end and a dual port 1600 motor. This was the donor car for the motor and torsion setup. It took about an hour to pull the motor and trans, and to pull the body off the pan

gonna do orange and black theme i should have a jd2 bender soon... hopefully lol

I finally have a sandrail... kinda. It needs alot of work, but i hope to have it drivable by Halloween 2010 it needs a new rear torsion setup, strip the house paint etc the main thing right now is the cage is to low for me, anyone with a bender willing to help for a couple cases of beer? my neighbor has a jd2, but i dont know him to well yet and he just moved in so its not mounted to the ground yet. i cant wait to hit the dunes oh and its going to be right hand drive lol

we had a fun time, first night we took out the baja bug and lost the airfilter and of coarse dont know when or were we lost it so who knows how long we drove with out one. So after a few beers we made a filter out of a sock and a hanger, it last for a bit but the bug died near comp. Thanks to 2 guys in a rhino we found our way back to comp ( we were alot closer then we thought and would have gone the wrong way). saturday we cleaned up a bit, then spent the rest of the day trying to make an airfilter, we finaly gave up and decided to take the trucks out. i didnt get much for pics, forgot my memory cards at home