Jump to content

nwtdiesel

Members
  • Posts

    611
  • Joined

  • Last visited

Posts posted by nwtdiesel

  1. Its to hard to try and get everyone together...

    I would much rather dune and rock crawl or sit in my driveway doing nothing then watch football.

    I can go on the early morning run Sun Sept 28th or Sat Oct 4th or Sun Oct 5th

    Im definitely going for 3-4 days Oct 25th

  2. Ill be going the Oct 23-26 weekend before Halloween to do lots of duning before the crowds rut it out. I will possibly go Oct 30-31 to cruise around, check out vendors and to show some friends from NM around the dunes. If anyone needs a group to camp with your more then welcome to camp by us. Ill leave Fri afternoon because of a Dyno event im holding at my shop, but my friends will stay till Sunday.

  3. Here ya go Chad. This is for our trans/engine set up with engine in rear and trans in front. Mendeola E box or 2D, I'm not sure about any other type of Mendeola as I only been researching these two models.

    The Allen plug in picture 3 almost directly below the "M" in the word Mendeola would be where you pull fluid from. The Allen plug in picture 4 or closest to the shift linkage/nose cone is where you would feed the fluid into. The big 1 1/8" bolt in picture 1 is the fill plug. On the bottom of the trans is a 17mm Allen drain plug (no picture) the bolt with the set nut in picture 2 is for the ring gear so don't mess with it. Hope this helps.

    Don't know why but pictures rotated when uploading from my phone and won't upload in order. When I install my set up I'll do a write up and post better pics and do it from a desk top.

    post-8598-0-04557600-1410073513_thumb.jp

    post-8598-0-61774700-1410073551_thumb.jp

    post-8598-0-27746100-1410073597_thumb.jp

    post-8598-0-75266500-1410073641_thumb.jp

  4. Here is the link to the pump several guys are running. Much cheaper then some of the $500 pumps out there. All you do is mount the pump by the trans and run a line from the rear trans port into the pump then run the line from the pump to the front of the trans by the nose cone. Run 12v power to it and a switch. When your climbing a hill or going to wheelie just switch it on.

    http://pages.ebay.com/link/?nav=item.view&alt=web&id=280782665954

×
×
  • Create New...