goodguys75 Posted February 17, 2011 Posted February 17, 2011 hey my factory pull start on my 70 is not going all the way in...about 3-4 in of pull rope left out....Do i get a new spring for it and that would fix it??? seems too work well...have a rope and new pull handle for it, just wanted to get my ride running before i work on the pull start...thanks Quote
mineurbiz Posted February 17, 2011 Posted February 17, 2011 hey my factory pull start on my 70 is not going all the way in...about 3-4 in of pull rope left out....Do i get a new spring for it and that would fix it??? seems too work well...have a rope and new pull handle for it, just wanted to get my ride running before i work on the pull start...thanks You could just wind, the spring tighter. Quote
Jakster884 Posted February 17, 2011 Posted February 17, 2011 I posted on this same topic. Check them out and watch the video Bustin bs posted. Made my life much easier. Quote
Bustin-bs Posted February 17, 2011 Posted February 17, 2011 Just a reminder these springs work really good just add greese! Most of the time peopel will forget to add greese and after a while the springs will bind and not retract all the time. Also as mentioned earlier you could wind the spring a little more to add tension... Quote
goodguys75 Posted February 17, 2011 Author Posted February 17, 2011 (edited) sounds good, I will try to wind a little tighter and add a little lube.....thanks where is this video???????? Edited February 17, 2011 by goodguys75 Quote
Jakster884 Posted February 17, 2011 Posted February 17, 2011 If you go to Honda 70 talk scroll down about 30 posts you will see one from me about Help with a pull starter. Or you can have it handed over like this to make it easier. http://www.dumontduneriders.com/invision/index.php?showtopic=15777 Quote
mineurbiz Posted February 18, 2011 Posted February 18, 2011 Also go to the top of 70talk and download the manual, this is a great tool. Quote
goodguys75 Posted February 18, 2011 Author Posted February 18, 2011 If you go to Honda 70 talk scroll down about 30 posts you will see one from me about Help with a pull starter. Or you can have it handed over like this to make it easier. http://www.dumontduneriders.com/invision/index.php?showtopic=15777 nice thanks alot.. Quote
goodguys75 Posted February 18, 2011 Author Posted February 18, 2011 Also go to the top of 70talk and download the manual, this is a great tool. I have done that....your right it is a good tool and referance...thanks again Quote
goodguys75 Posted February 18, 2011 Author Posted February 18, 2011 done...just waiting for my copper washer for my cam bolt and i can start the 70 again without it leaking..lol Quote
Jakster884 Posted February 18, 2011 Posted February 18, 2011 Also go to the top of 70talk and download the manual, this is a great tool. I printed this Biatch out. It was quite thick once done but hell its a Hard Copy now. Great Info. Quote
mineurbiz Posted February 18, 2011 Posted February 18, 2011 Tell me about it Jack, I have the PDF's for the 660 Raptor, 700 Raptor, YFZ, ATC's, TRX450's. I printed out two of the manuals and said forget it. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.