jwcarguy Posted May 5, 2014 Share Posted May 5, 2014 (edited) I have a complete intake to oil pan, 41k mile pullout engine from a 2010 Chevy Silverado 4x4, it is the aluminum block version 5.3L w/ factory #243 cyl heads, with all accessories (water pump, p/s steering pump, alternator, tensioner & idler pullies, belts, a/c comprossor & bracket, 4L60E flexplate) has factory uncut engine harness w/ 4L60E connectors, dbw throttle body, complete coil packs (LS2,3,7 style), starter, factory oil cooler lines (came on HO & HD models), battery cables, stock fuse box and engine mounts, etcThe later Gen IV engines (05'-up) come with the heavier duty connecting rods and floating pin pistons, unlike the earlier Gen III engines (5.3, LS1/6, LQ4) LQ9 had the stronger bottom endI do not have the exhaust manifolds or pcmDoes come with the truck harness, fuse box, engine mounts, battery cables,etcI do not have the trans, it was a (4wd) model 4L60E and we were going to put this in my son's Ford Ranger (2wd) as a prerunner project, but he doesn't have to funds to move forward on this project right nowIt is basically, the stock vehicle version of the LC9 engine from Chevrolet Performance link to specs: http://www.chevrolet.com/performance/crate-engines/lc9.htmlbut the crate engine doesn't come with full front drive accessories or engine wiring harnessin Las Vegasasking $2,100 OBO SOLD!!!pm/call/text (702)677-4085 Edited May 7, 2014 by jwcarguy Quote Link to comment Share on other sites More sharing options...
midtravel Posted May 6, 2014 Share Posted May 6, 2014 Nice Cam in the garage Quote Link to comment Share on other sites More sharing options...
jwcarguy Posted May 6, 2014 Author Share Posted May 6, 2014 Nice Cam in the garage Thanks! I just did a LS/ T56 swap on it, now just have to get the new Vintage Air a/c system charged! Quote Link to comment Share on other sites More sharing options...
ltr450rider Posted May 6, 2014 Share Posted May 6, 2014 Been looking for something to do to the S-10, this should pretty much drop right in. Make my 3/4 mile commute to work just a little quicker, also make my rear tires wear out a little faster. Quote Link to comment Share on other sites More sharing options...
ynot Posted May 6, 2014 Share Posted May 6, 2014 I also have a nice cam in garage that will make those tires disappear in a hurry. If anybody has a use for it I will make a hell of a deal just to get rid of it. Sorry don't want to steal your thread but had to mention it. Quote Link to comment Share on other sites More sharing options...
dunefreak Posted May 6, 2014 Share Posted May 6, 2014 I also have a nice cam in garage that will make those tires disappear in a hurry. If anybody has a use for it I will make a hell of a deal just to get rid of it. Sorry don't want to steal your thread but had to mention it. He meant Camaro. haha 1 Quote Link to comment Share on other sites More sharing options...
jwcarguy Posted May 6, 2014 Author Share Posted May 6, 2014 I also have a nice cam in garage that will make those tires disappear in a hurry. If anybody has a use for it I will make a hell of a deal just to get rid of it. Sorry don't want to steal your thread but had to mention it. What are the spec's on the cam? Quote Link to comment Share on other sites More sharing options...
ynot Posted May 6, 2014 Share Posted May 6, 2014 What are the spec's on the cam? custom grind cam (238.28/240.69 110+4 the lobes are XFI on the intake and XER on the exhaust, 106 ICL), Quote Link to comment Share on other sites More sharing options...
jwcarguy Posted May 7, 2014 Author Share Posted May 7, 2014 SOLD!!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.