rhino king Posted January 23, 2008 Posted January 23, 2008 (edited) does any body other than joe duner...have suggestions on leaky bead locks?? Edited January 23, 2008 by rhino king Quote
SanDollars Posted January 23, 2008 Posted January 23, 2008 I don't know about Rhinos but with a sandcar, check and see that they are pretty tight, about 15ftlbs, then put a little slime (4oz) in each wheel and drive it around. This should do the trick or at least slow down the leakage. Good luck Quote
barefoot bob Posted January 23, 2008 Posted January 23, 2008 i say this aaaallll the time SLIME I HAVE IT IN THE PADDLES OF MY LT they hold air right through summer. there is mild sepage maybe 5 lbs. but they dont go flat. without it my tires go flat quick. Quote
britincali Posted January 23, 2008 Posted January 23, 2008 i say this aaaallll the time SLIME I HAVE IT IN THE PADDLES OF MY LT they hold air right through summer. there is mild sepage maybe 5 lbs. but they dont go flat. without it my tires go flat quick. I run slime in both my bikes, I've never had a flat on the trail. Its cheap insurance against a ruined day. Quote
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.