need help with heater

[Warrior07]

So yesterday i was washing the trailer going thru it make sure everything works. so i turn on the heater ok it works now i turn it off and the sum biatch won't shut off unless i push in the main power switch. it stays off but once i hit the thermostat it comes on but won't shut off . :no_no:

[dinicolada]

Pete what do you mean by wont turn off? Does the fan keep running but the burner turn off? Or are they both staying on?

There is a time on the board that will keep the fan on after the burner goes out, it may run for a few minutes after you turns it off to cool the coils and purge out any unburt gas.

:no_no:

[TbonesMalones]

Sounds like the T-Stat might be bad, I would pull off the T-stat face and see if the White(heat) wire is connected. If you disconnect the white wire and the fan contiunes to blow, your digital board is probably bad.

[Warrior07]

sorry false alarm it works now!

[wingnut]

sorry false alarm it works now!

Cool it started working again...............but I think you need to voluntarily ban yourself from DDR for no less than 72 hours!!!!!! :no_no:

[TheAlaskan]

I agree with ^^^^^^^^ how am i supposed to know if i can crash your camp and drink your beer with false alarms like this? ...... :no_no:

[Warrior07]

:no_no:

Cool it started working again...............but I think you need to voluntarily ban yourself from DDR for no less than 72 hours!!!!!!

ok wingy dingy get the flames off your avator truck and will talk :worthless_without_pics:

Edited February 11, 2008 by warrior07

[wingnut]

Ok.....as soon as you take that pic off DDR where yor truck got stuck at Logandale. You know the one where two drives don't even get stuck!!!!! DERRRR

[Warrior07]

Ok.....as soon as you take that pic off DDR where yor truck got stuck at Logandale. You know the one where two drives don't even get stuck!!!!! DERRRR