mirrors

[foolofsand]

Anyone know where to get a 10 inch rear view mirror for cage

bar over head? Need black anodized billet. Thanks

[vegas style]

gtp mike and adam should be able to hook you up

[Adam @ GTP Off Road]

we have a 9" and a 17" mirror, Axia Alloys, very nice billet black. We have them instock and will have that at Dumont at our vending spot. we only have 2 of each I think left and they should sell out.

$120 for the 9"

$185 for the 17"

[foolofsand]

Adam, I have tabs welded onto the roll cage. Is this a mirror that u can just bolt into the end of the mirror?

[Adam @ GTP Off Road]

the 17" would work on tabs but they would have to be in the right spot. If that gap is 10" we don't have anything in house to fit that, and would have to dig around to see what we could get.

[Just Mike]

The 9" Mirror can be mounted to a tab if it is horizontal. Other wise you could just use the clamp and the mirror and not use the tabs.

Edited February 13, 2014 by Mike @ GTP OFF ROAD

[foolofsand]

The 9" Mirror can be mounted to a tab if it is horizontal. Other wise you could just use the clamp and the mirror and not use the tabs.

cage has cover on it so cant use a clamp on, but thanks

[Just Mike]

cage has cover on it so cant use a clamp on, but thanks

These clamps were designed to work under roofs. If you are at Dumont this weekend come by vendor row and you can check them out. Or you can swing by our shop if you would like.