goodguys75

I've got a full set of 14" ITP t7 wheels that have a beadlock ring but aren't the beadlock wheels. They are polished with black lugs and cap with black backs. They have Bighorn tires on them with 14x9 fr and 14x11 rear. The wheels and tires were only used on it to cruise around at the racetrack. They are still in new condition! $550

Pro1 steering wheel with billet adapter and shaft. $150

Trinity clutch sheave. $175

Dynatek CDI. $160

Dynojet PClll. $225

(2)Itp dunestar paddles 26x10x12. $125

And i'm not desperate so the prices are firm unless you buy everything, then i'll work a little. All parts are brand new except for the wheels stated above.

r your sand paddles on wheels or just the tires????

YOU GOT IT DUNEFREAK, I was talking about non resident ohv stickers.

I just added the bit about the passes afterwords.

thanks we finally agree on something. :surrender:

hope to see you all this next weekend.

just bought an ohv sticker at the gas station at gowan and rancho...they still sell them, just fyi...good info for peeps that live in the nw area...Im glad i did not have to go all the way to nv off road...thanks rick

I am looking at purchasing a RZR S in the near future. I have a question about the warranty. I know this is a must have for this Farm Equipment.

What is the Average cost people are paying for the warranty and how long are the term offered. Is there up to 5 years? Just want to know before I make the purchase and they tell me 2 years and I should have been able to get an extra 3.

Thanks for your Input.

waste of money...if you are a do it yourselfer.....I never purchase warranty with my side by side......save the cash for something cool, or just more $ to pay off the ride...

OMG Christmas. Already? I forgot. Humm. Gifts or more 70 parts. Do the math

Im ready to complete my build, just waiting for my motor guy to come back from vacation, wont be till dec, before my motor gets done....

so this morning, i start my truck and the service 4wd warning comes on, so im ok kool need to check this out. while on my way to work getting on the freeway i fill the truck jerk and rpms drop check engine light comes on and the truck puts itself into four low. i pullover and try to get the truck back into 2wd but it wont go.

has anybody had this problem? i need help.i would like to be able to make it to the dunes for turkey day.

truck info

2004 gmc yukon xl 3/4 ton 4wd 6.0 eng auto trans with 65000 miles.

oh yeah i also used the onstar diagnostics and all they told me was 4wd malfunction needs to be repaired within the next seven days.

maybe disconnect the battery for a few min too see if that would help.....got too love modern technology or not....good luck...o I forgot go to the dieselplace.com and maybe you can find your answer...they might be able to help...

HELLO does anyone have a hookup for new tires...

i have a 2006 f-350 dually 2x4 crew cab... tire size 245/75r/17" load range E

looking to get 4 or 6 tires, depending on price? (plus install/balancing)

BRAND..

BFG all terrains

or

BFG Rugged Trail All Terrains tread pattern called (differential)

depending on price i will get road hazzard as well.

i will be paying cash.. I WANT THEM BY THE WEEKEND

please call me ASAP 371-1799 RICK

just go to discount or costco....bfg are super expensive....can go with another brand,like nitto that is not as expensive and a good tire....but I perfer bfg's and going to buy some next summer for my ride...they went up about 250.00$ since i bought like 3 yrs ago....

which fire extinguisher is best for rhinos etc? thanks

I bought one at lowes, think it was like a marine type extingisher.....fits under the driver seat......just in case

We want to add pillar gauges to the Duramax. Anyone have any suggestions or info on who to go to (or not go to LOL)? So many businesses open and close, just don't wanna go to the wrong place. Any info greatly appreciated!

you can do them yourself, not too difficult.....

anyone have a set of aluminum factory wheels that are in good shape just laying around...want too put them on a trailer....do not need tires, so tire condition is not a issue...thanks just send me a pm if ya would.... 8 lug truck wheels

The factory 70atc wheels unbolt. Then you'll have to pry the bead off using a tire spoon. Kind of a pain because they are usually very old, but doable by hand. Going back together is a piece of cake. Just be sure to use new wheel orings and glue them in place.

cool thanks....my friend who has a tire shops one of his workers, it took him like 25 min to take the tires apart....they were stuck on there.....I would have never been able to do it at home

What would the postage be to send it to northern CA? I do not understand what the base is, is it the part that snaps to the frame? . My dog chewed the foam off my driver seat

you already have the seat base on the seat...It holds the seat to the rhino...the plastic base thing.....you should just need the seat...

yea i think i have one let me look sunday when i have time and you can have it.......

nice thanks alot...se ya

im restoring my 70 back to factory stock....anyone here have a good/complete air box for it??????? I have a feeling a lot of peeps pull it off and put on a exposed air filter...thanks........I live in vegas

No we take the shashone turn off

ya that is what i ment....thanks for the input

We live in the NorthWest and the back way through Indian Springs then Pahrump is longer and you burn a little more gas, but is much easier on your rig.

so you go all the way to tecopa turn off of 160?

Do you have the foot pegs, that are all complete....most foot pegs are missing the rods that forms the pegs????ya know what im talking about???i guess it is the part that keeps your foot from going into the rear tires..... and do you have a rear grab bar??? thanks

Hey guys i got a crazy question, what would be the best way for me to go to dumont??? from say indian springs way...should i go down the 160 to the tacopa turn off...or should i go to the If i recall the ( laythorp wells way) did it once comming home...pullin a 34 ft toyhauler...Im in no hurry so distance is not an issue....just dont want to go the 15 to blue diamond way....just want too see what others are doing...thanks andre

this is the only web site that does it, so i know its not my computer...when i click on the link to dumont a lot of the times it says cant find server...did this with the old server too????

wow 255 seems a little steep for a rhino, but not sure.....did you back it off to see if it helped.....seems like it might be too tight.....

I wanted to know where the safety stickers go on the bike....you know all those black stickers that are all around the bike...should have made myself more clearer....sorrry, but thanks for the pics

I re-doing my bike back to the factory look...Is there somewhere i can look for decal placement on the bike??????? just a thought getting close to doing it....

They make a tool for doing just that. But if you don't have it and the tire has been on there a long time you might just make yourself mad and the tire will kick your a$$ in the process. A tire shop should only be $5-10 to remove a tire for you. Hell bribe him with a 6 pack and tell him to reinstall it when you have it painted.

ya i think I will take to my buddies tire shop......just wanted to get it done now, and tried like hell to figure out a way to paint with the tire still on....thanks.

do i need to take it to a tire shop to get rims off the tires????? I tired separating the rim from the tire, but was unable too....I want to paint the rims, but tried alot of things to try to paint the rim on the tire, but i think the best thing to do is just take the rims off and then paint....any sugestions

so my fuel filter on my onan gen is leaking, so i call a few rv places and they want like 17-18$ for the fuel filter....then i call cummins on losee and they had one for 12$ and I bought some extra fuel filters and oil filters for my dodge truck....these rv places got ya by the balls if you need something asap.....there are such a joke....now I feel better...more money in my pocket for the drags next week.....

r u lookin to include the bike with cash or just the bikes value for a sandrail...because most of what you want is alot more expensive then just the bike as a trade....just my 2cents...but it is a great looking bike and good luck with what ya want to do.........