JoeDuner Posted January 9, 2009 Posted January 9, 2009 (edited) I saw these and they seemed like a great deal. Has anyone used them yet???? I have seen them on side x sides, I am wandering if they hold up on quads ? http://cgi.ebay.com/ebaymotors/Yamaha-Rapt...sQ5fAccessories http://cgi.ebay.com/ebaymotors/Yamaha-Rapt...sQ5fAccessories Edited January 9, 2009 by JoeDuner Quote
Howie Posted January 10, 2009 Posted January 10, 2009 I bought some from a different guy on ebay. They work great but it wasnt a complete kit. I had to buy 9006 adapters at auto zone and wire it in on my YFZ. Mine draw alot of power I need to get a bigger stator now. There great for duneing at night. If you get them check your voltage with a meter when your quad is running and lights are on. I had to recharge my battery last trip. Quote
Richard Cheese Posted January 11, 2009 Posted January 11, 2009 hey joe joe check this shizz out http://www.ddmtuning.com/hidkihidbuhi.html scroll down to the raptor brand hid's im runnin them in my truck, as well as my bro and a few friends...no problems whatsover.... from the looks of the pics on the ebay links you posted, they are the same small ballast...you just need to find out what bulb your rappy runs and buy those...save yourself some coin too! Quote
RUn2it Posted January 11, 2009 Posted January 11, 2009 (edited) hey joe joe check this shizz out http://www.ddmtuning.com/hidkihidbuhi.html scroll down to the raptor brand hid's im runnin them in my truck, as well as my bro and a few friends...no problems whatsover.... from the looks of the pics on the ebay links you posted, they are the same small ballast...you just need to find out what bulb your rappy runs and buy those...save yourself some coin too! you are on top of it RC, their HIDs have a lifetime warranty too $59.95 $49.95 $39.95 Edited January 11, 2009 by RUn2it Quote
JoeDuner Posted January 11, 2009 Author Posted January 11, 2009 That's what I'm talkin about!!!! Quote
Richard Cheese Posted January 11, 2009 Posted January 11, 2009 (edited) you are on top of it RC, $59.95 i like being behind BTW...ive been pimpin these HID's for the duramax now for a couple months http://www.dumontduneriders.com/invision/i...showtopic=10148 Edited January 11, 2009 by richard cheese Quote
Vegas250rr Posted January 11, 2009 Posted January 11, 2009 hey joe joecheck this shizz out http://www.ddmtuning.com/hidkihidbuhi.html scroll down to the raptor brand hid's im runnin them in my truck, as well as my bro and a few friends...no problems whatsover.... from the looks of the pics on the ebay links you posted, they are the same small ballast...you just need to find out what bulb your rappy runs and buy those...save yourself some coin too! I too run their 50w kit in my Solteks.... but I am having some problems with one light firing, and have to turn them off and then back on again quickly to get it to ignite... I guess you get what you pay for Quote
Richard Cheese Posted January 11, 2009 Posted January 11, 2009 I too run their 50w kit in my Solteks.... but I am having some problems with one light firing, and have to turn them off and then back on again quickly to get it to ignite... I guess you get what you pay for i have read on another forum with another brand of 50 w hid's that the stock harness cannot handle the initial power it takes to fire up the hid's have you tried the 35 watt ones instead of the the 50 watts?? is this happening with only the sol-tecs on, or other lights too? how many sol tecs? Quote
Vegas250rr Posted January 11, 2009 Posted January 11, 2009 (edited) i have read on another forum with another brand of 50 w hid's that the stock harness cannot handle the initial power it takes to fire up the hid's have you tried the 35 watt ones instead of the the 50 watts?? is this happening with only the sol-tecs on, or other lights too? how many sol tecs? I did a HID conversion to my solteks, I wired a 10g. hot and Neg through a 40amp relay and a maxifuse... I have more than enough wire in my harness. and I am using a HI/LOW foot switch out of a older ford truck to fire the relay. see the pics below Edited January 11, 2009 by Vegas250rr Quote
Richard Cheese Posted January 12, 2009 Posted January 12, 2009 I did a HID conversion to my solteks, I wired a 10g. hot and Neg through a 40amp relay and a maxifuse... I have more than enough wire in my harness. and I am using a HI/LOW foot switch out of a older ford truck to fire the relay. see the pics below yep...enough wire you could fuggin light up a small casino with that setup call them on their lifetime warranty. you would be the first person i have heard of to do it Quote
White Rhino Posted January 12, 2009 Posted January 12, 2009 (edited) I did a HID conversion to my solteks, I wired a 10g. hot and Neg through a 40amp relay and a maxifuse... I have more than enough wire in my harness. and I am using a HI/LOW foot switch out of a older ford truck to fire the relay. see the pics below Fuggin A, Vegas250RR doesn't do things HALF a$$!!!! very nice set up!!! Edited January 12, 2009 by White Rhino Quote
JoeDuner Posted January 12, 2009 Author Posted January 12, 2009 How long are the leads from the ballast. Are the ballast water tight. Where would I mount them on the Raptor? Quote
vegas style Posted January 12, 2009 Posted January 12, 2009 this is my HID set up. have it wired to the high beam switch. and take it off during the day- just a nut and plug Quote
Richard Cheese Posted January 12, 2009 Posted January 12, 2009 How long are the leads from the ballast. Are the ballast water tight. Where would I mount them on the Raptor? about 1.5 to 2 ft, and the ballasts are sealed thats the great thing about hid's JoeJOe...tearin the front end of yo' shiat down and figuring it out honestly, im not sure.....im still tryin to find a mounting place on my DS650 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.