Bound4Dirt Posted April 3, 2007 Posted April 3, 2007 How do you block off the oil pump so I can run pre-mix? Quote
barefoot bob Posted April 3, 2007 Posted April 3, 2007 your blaster oils perfectly why would you even consider this........................ Quote
ocean's 4 Posted April 3, 2007 Posted April 3, 2007 That is the best upgrade you can do to a Blaster, did it to my wife's old Blaster. Never know if that injector line is going to get clogged up or quit working. It'll take about 30 minutes to get it all installed, pretty simple upgrade, just follow the directions. Quote
Bound4Dirt Posted April 3, 2007 Author Posted April 3, 2007 That is the best upgrade you can do to a Blaster, did it to my wife's old Blaster. Never know if that injector line is going to get clogged up or quit working. It'll take about 30 minutes to get it all installed, pretty simple upgrade, just follow the directions. I didn't get any instructions Can you give them to me? Quote
ocean's 4 Posted April 3, 2007 Posted April 3, 2007 Try this....click. There ya go, pictures and all. Nice job cmyfirepole. Quote
Bound4Dirt Posted April 3, 2007 Author Posted April 3, 2007 There ya go, pictures and all. Nice job cmyfirepole. Port Magic has it now, they are doing the top end. I noticed your in Hesperia. If I have any trouble, maybe lunch and you can come watch to make sure we did it right? Thanks. Quote
ocean's 4 Posted April 4, 2007 Posted April 4, 2007 Yeah man, just let me know when and I can lend a hand. Quote
Bound4Dirt Posted April 4, 2007 Author Posted April 4, 2007 (edited) Done Thanks guys. Son and I did it by the book. We'll find out if we did it right when the top end comes in this week. Again, thanks guys for your help. Cheap insurance if you ask me. Footnote: The cap to cap it off is a yamaha part for that. I guess Yamaha knows there is a problem with those pumps. Edited April 4, 2007 by Bound4Dirt Quote
ocean's 4 Posted April 4, 2007 Posted April 4, 2007 Right on, better safe than sorry on stuff like that. Cheap, easy preventative maintenance. Quote
Bound4Dirt Posted April 5, 2007 Author Posted April 5, 2007 I also went up on the main. Stock was a 230 and went to a 240, then top end went. I put a 250 in it now. I was told 240-250 is ok for non-head work. Well see how she does with that too. Quote
Bound4Dirt Posted April 12, 2007 Author Posted April 12, 2007 (edited) Is there a proper way to break-in the new top end besides no WOT until first oil change? Edited April 12, 2007 by Bound4Dirt Quote
SandBox_Kid Posted April 12, 2007 Posted April 12, 2007 I also went up on the main. Stock was a 230 and went to a 240, then top end went. I put a 250 in it now. I was told 240-250 is ok for non-head work. Well see how she does with that too. Was it running too lean? Quote
Bound4Dirt Posted April 12, 2007 Author Posted April 12, 2007 Was it running too lean? UPDATE: After taking it down for the machine work. The top end was original Rudy at "Port Magic" of Hesperia said. So for 8 yrs, I say not bad! He said the 240 was fine. 240-250 is fine. I put the 250 in it and at our elevation 3500 ABS +/- I couldn't go with it. Had to put the 240 back in. I also purchased on EBay a polished and shaved head (.30). I keep old one. Nothing wrong with it. It runs like a champ, no kidding. Have to use 91 octane and a lower NGK (BR9ES). Really impressed with this little guy. Any questions, ask away. Total cost: Top end parts and head work - $175 Head (from ebay) - $39 Labor (paid son) - ?? Magnetic drain plug (old one was stripped on the head) - $8 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.