Jump to content

YFZ350KID

Members
  • Posts

    43
  • Joined

  • Last visited

Everything posted by YFZ350KID

  1. one last bump on here... let your friends know too... still forsale, still an amazing machine.
  2. yea, i know there are some killer deals outthere... but its worth a shot. all i need is one guy that wants this machine. as much as I'd like to keep it tho, i would like to get the money from it. if it dosent sell by christmas though i'll probabily keep it.
  3. Still up forsale... no one has even offered. $5000 OBO for an outstanding sand machine.
  4. thanks... its unfortunate that I have to sell it... its been an awesome machine to me. but, as with lots of others, i need the money for other things.
  5. bump... still for sale, call me please! (702)885-4394
  6. bumping this back up... still forsale... ill try to get the pictures up... sorry for the quality, it was night time the last time i was at my dads storage.
  7. Hello everyone, I'm sadly starting the process of selling my 2008 Yamaha Raptor 700R, it is in excellent condition, it is the yamaha blue color, factory graphics, like new condition (just a bit dusty). Dealer maintained at the Ride Now shop on boulder highway where it was also purchased new. It has an estimated 80 hours on it, I have been unable to go riding in the past year so its sat in my fathers storage in henderson. I would like to get $5000 for it, but I'm open to offers (please dont low ball me). It has a Power Commander III USB installed and a two brothers slip on race pipe. It has stock dirt tires and rear paddles. It ran great the last time I used it over a year ago, but it has been started a few times and it has Stabil in the gas. Please call me or email me with offers, e-mail is raptorracer82@hotmail.com (702)885 - 4394 (my cell)
  8. good to see I wasnt the first to post this. thanks for the link to help turnover this ban
  9. anyone see the latest legislation passed by our fearless leader :B it seems that because of possible lead content in the engine cases and other cast metal parts all the under 85cc quads/bikes are banned until they are up to spec with current laws. just wondered if anyone has more info on this, or to alert all of you about this this also affects parts/aftermarket and accessories
  10. depending on if your phone is a world phone you may or may not be able to use signals other than what ATT uses... my phone, a blackjack, can connect to any available digital signal but ATT has it locked so it only uses their frequency. you can get an unlock code from ATT for your specific phone for use outside the US, or outside ATT service areas.
  11. last weekend when i was out there, ATT had jack squat... my buddy that has nextel had service the whole time... and verizon guys seem to always have signal... i think im gonna call up att to get the unlock code so i can use any and all available signals...
  12. lol, duh kyle, im gettin paid a little over 2x what i made at the ccsd and only work 4 days a week... i dont know how long the hiring freeze will stay around at the city, but if a position opens up you should go for it, its worth the effort if you get lucky and get the position
  13. ya, i remember ya... so far everything I read about the 700's convinced me... i really do wish the banshee would have kept it together for the season though... oh well, whats spent is spent
  14. i gotta look and see what the deal is gonna be with the banshee... i just went and got a brand new '08 raptor 700 from the dealer tonight, so ill atleast get a good dune season with or without the shee... im gonna pop off the head in the mornin and check for (crossing my fingers) pinched o-rings in the head, or atleast see if the piston grenaded or some other random event... my bike is stock inspired, all the power adders are just bolt ons, the cylinders were bored .030 over the last time it popped to clean em up, other than that, stock porting, stock carbs, and not really anything that should affect reliability too much other than the cool head... but either way ill let you all know
  15. im not all too extreme in the power adder mods and such yet in the internals... the crank thats in it now is a new stock stroke hotrods crank and the ports are still stock... im planning to tear down the top end this weekend so i can get a better picture of what went wrong. im running 40:1 oil mix with ams oil 2 stroke oil with 100 octane fuel. again, i was running the 100 octane fuel as an extra measure of insurance on the motor... oh well... as far as the O2 sensors go, i'd be willing to hook up and install some O2's but its kinda pointless unless its running... I have heard of other people setting up wide bands on banshee's, but its usually more the drag guys that have them, and on the dyno everyone has a wideband sniffer in the pipes
  16. eh, either way, i was just sharing my problems trying for some constructive thoughts... not so much to get ripped a new one... anyway, thanks to those of you that were helpful and thanks for offering help...
  17. for the heat cycle stuff the extreme amount of time has been due to the lack of availability of actual riding time... everything as far as jetting was dialed in within the first hour of run time... as far as anything else goes, im doing all the work myself and following the instructions of a couple different people and lots of help reading articles and such off of bansheehq and working with a local builder. as far as the breakin procedures, everyone has their own deals... for the banshee's i like to do a couple of heat cycles, then re-torque everything, as stated above not having the time/money/others to ride with limited my ability to take the banshee out for long runs...
  18. well, unfortunately the banshee only ran for a total of 15 hours, and 10 of those were doing heat cycles and carb tuning... after riding around for about 4 hours, and not really ripping on it hard it started bogging really bad and i struggled to get out of a little bowl around the back side... got to flat ground and was towed back to camp by my buddy... pull the spark plugs and one had aluminum on it, so, another piston gone!!!! dangit couldnt have come at a worse time, we hadent even left vegas 12 hours earlier, and already had to pack up and head home plagued with breakdowns on 2 of the 3 quads we went with... anyway, im irritated at the situation and really pissed that my dune season may be up in smoke before it really gets started thanks to those of you that stopped by while i was in the bowl lettin the motor cool down and waitin on my buddy bringing parts and the tow quad...
  19. im seein 3.59 for diesel 2 at the circle K on lakemead and boulder in hendo, and the rebel at van W & lake mead and the rebel on warm springs & marx are both at 3.59 last i saw i'd love to see diesel down to the price it was when my family first got a diesel... you know 0.89/gal
  20. good times... supposed to be windy out there friday and saturday, but sunday looks good so far... funny having snow in the forecast in the shoshone area
  21. me and a few buddies will be out at the Big D october 10-12, feel free to stop by and say whatsup... i ride a black and red banshee and have a black ford dually pullin a Patio Hauler 5th wheel... my buddy and his family ride various polaris quads and he has a white dodge dually towin a victory lane 5th wheel and our other friend rides a black and red raptor 660 and drives a gold lifted chevy 1500 if you see us feel free to stop by, sorry we wont be offering any alcohol up but we keep a dry camp in that manor but ill hook you up with some water/gatorade/soda cya out there Brent
  22. ISBB, i know how the motor being apart is, my shee's been torn down for 5 months, and im finally gettin around to tossing it back together this weekend and hopefully having it running by next weekend... after that it up to fate if the motor will last more than one trip to the big D... if it dont, i get the feeling i'll be spending a lot of money on somthing new and let the shee sit for a while. See you all out there!!!!!!!!!!!! cant wait, im half way ready to just go get a new 700R or a YFZ450 again... just so I will make the whole season!...
  23. the basic differences of motorhome vs 5th wheel/trialer... if your motorhome has drive train issues while on vacation, now you are out of a place to stay, you dont have 24/7 access to your home away from home, and it can sometimes be difficult to get parts depending on the manufacturer... however the up sides out weigh these potential issues for some people. as far as being stuck in the cab of the truck, check the state laws in the areas you wish to travel... If i remember correctly as long as you have a constant reliable open line of communication between the cab and 5th wheel you can have people in the 5th wheel (in NV and Utah, never had a problem in CA either, just keep the blinds down)... this does not apply to trailers though.
×
×
  • Create New...