sandslayer

2 years old. It's crazy the rest of the tires look new. I think that the one side of the trailer may carry more weight due to the slide out pushing my rhino over to the side that has the tire wear.

I have one tire on my fifth wheel that the tread is just wearing off. Before my last trip i noticed that the tread on this tire looked worn but when i came back to town i looked at it and i was noticeably worse. The other tires look fine. I have a triple axle 38.5' gearbox. Any thoughts...

In my "opinion" if i cannot afford to pay to get into Dumont i'm not going. The fee that i have paid for my annual pass this year is a small price to pay to help keep the Dunes up and open for many years to come. Just my "opinion".

The Rhino is a blast on the dirt but for the dunes the RZR is much better. Just my 2 cents...

Usually a common (neutral) is not required unless the piece of equipment calls for it. Most commercial kitchen equipment requires a neutral.

SANDAWG- Please be very careful once you are making your final connections at your main panel electricity is nothing to take for granted. Being an electrician trust me anything can happen i have seen people get electrocuted. I would suggest to get a qualified electrician to make the final connections at your main panel. :ah:

The white you see on the breaker is correct if you are running a 208 volt compressor or a welder.

Make sure that the neutral bus bar is isolated from the panel. Do not connect the grounding bar and neutral bar together. The GFCI breaker is wired incorrectly take the coiled white wire on the GFCI breaker and land it on the neutral bar and take the neutral for the circuit and land it on the neutral load terminal on the GFCI breaker. The bare ground coming from your ground rod can touch the panel. I would buy a grounding bushing and put it on the the 1-1/4" or 2" pipe that is entering the panel (can't tell pipe size from pics). Once the grounding bushing is on run the bare ground from your ground rod through the lug provided with the bushing then to your grounding bar.

What happened to the toilet paper that was wrapped around it? :fro_smokin:

It's a weekend warrior- sell it!

If the LAPD was chasin me i wouldn't stop either. Everybody has bad days this was one of those for Rampage.

Thanks for the info...

Does anybody know of any good local bands playing this weekend (April 26th)?

I have been a member of IBEW local 357 for 11 years now. Being an Electrician is the best job i have ever had and it really paid off to go through a five year apprentice program. The hall is at 620 legion way on the corner of bonanza and lamb. They usually take applications throughout the whole year- right now would be a great time because we are in shortage of apprentices due to the great amount of work in this town. Hope this helps...

My wife went out to start her car and she went back in to get her coffee and not 2 minutes later car was gone. :argue: :porn:

It was great to meet everybody you are all good people drunkest girl is effen crazy I had a blast hope to meet up again soon

Sorry i forgot... Next time i'll bring it down to you. The needle for the carb was bent but still works. The bend was a perfect offset but still clear enough for gas to pass through. :xmas1:

It was strapped down in the bed freak accident i guess. :xmas1:

I had a mobile RV mechanic come over to the house he specialized in generators. He new exactly what it was- :xmas1: the carb was all gummed up. He took the whole carb apart and cleaned it put it back together and it started and ran right away. Let me know if anybody wants the info for this service i was very happy with the outcome.

You can see where it went under the trailer and hit the rear axle. I consider myself lucky that it didn't screw up the fifth wheel or hit a car behind me.

Lost my spare tire on the way to dumont. I went the baker way from las Vegas showed up at at dumont and no spare tire. Its a pro comp 35" tire with a black Helo rim. I will post a pic later. :freakin_nuts:

I think the previous owner let the gas varnish and it ruined the carb. It will start and stay started with ether and i cleaned it with carb cleaner but no luck. Its an onan 5500 gold and is still under warranty i just don't have the time to take it in. Anybody know where i can get a new carb for a good price?

We better be going I hope to meet some of the DDR people Jay get the wife fixed

Does anybody know of a generator mechanic that will come to the house?