TCS T

Thanks Ken!

This is what I have been up to in all my free time! Ha-Ha-Ha!

Once Again! Thanks to ALL Who Support Me and my Business!

Hey Terry, Thanks for sidetracking a positive post about me! :eatdrink021: You have succeeded in your evil plan to put me out of business!

Hey Terry, If people don't like me they don't support my business. You are a direct representative of your organization! (In the future you should try to stay out of business that does not pertain to you, so as not to offend the people that support your org.!) And as far as common decency, I had your number on my desk to call you back, but I was hoping to see you personally to let you know my decision. Unfortunately you were badgering me on this forum (again) before I had a chance to tell you personally! You are right, You are too old for this type of behavior and you should try to keep to yourself with your negativity! And as far as supporting Dumont, I am completely for it. (we pick up other peoples trash EVERY weekend and pay the kids in our camp $2 for every grocery bag of trash collected that is not theirs. It is shame you are the one I have a problem with! It seems you have always enjoyed trying to make me look bad or supporting others who are? I don't know what your problem is, but I know that I am not going to lose any sleep over it. See You at the Dunes! Love Your Friend, Travis P.S. I apologize for introducing you to Boyd Coddington Jr. and socializing with you at the SSSS I was excited about our new Weld Racing Sand Car Wheel and probably drank more than I should of!

Thanks Again To Each and Everyone of You that has helped make us what we are today! Sincerely, Travis Reif

Hey Terry, I don't respond to you because of personal reasons! Let's just leave this off the public forums O.K.! Travis Reif

You are very judgemental with very little information, and I am glad that works for you! (I should be used to people like you on the internet by now.....but I am not!) Not that it is any of your business! But I have had to send my son to several specialists for a breathing problem that he aquires periodically when we go to Dumont! He gets so bad that he can't hardly breath and can't sleep so we have to rush him back to the ER in Vegas! That is why if you where in my shoes and got that look from your wife "to pay attention to your family" I would hope you would do the same! But from your quick to judge attitude, I doubt you would understand! Like the saying goes.....Haterz will be Haterz, Whatcha Gunna do? P.S. MY FAMILY COMES BEFORE YOU! whoever you are?

WHAT'S UP ALL YOU FOOLS AND SUCKA'S?! I have been very busy with a new son and another child on the way! Also we are working very hard to take The Custom Shop to the next level! We are celebrating 10 years of business in Vegas and have aquired alot of commitments with our parts manufactures and various promotional events! As time seems to be a very valuable asset these days, I have pretty much given up on the Forums thing completely. (It ISN'T only DDR I have refrained from) Thanks for all the good words from those of you that wrote them! And as for the typical RUDE REMARKS from the internet a$$hats :eatdrink021: , You know where you can shove those!

SWEET! :redhat:

That's cool he is a nice guy! As far as the soft top, try Santa Barbara Upholstery on E. Charleston.

Where's the pics?!

Very Cool Tony! Congrats!

Yes I do. I am currently building his new Polaris Ranger. It should be really cool! (6 seater, HID's, Cage, Big Wheels & Tires, etc.)

Congrats on the new toy! You must have got it somewhere close to home, cause it has one of our PIAA light rack set-ups! Did the old owner just purchase a new Polaris Ranger to replace the Rhino?

Thanks Guys!

Instead of the $12K for a walk in typical customer! I guess you do work for free for your friends! I'm sorry I have to charge my friends......My enemies don't shop with me!!!!!

Shop around the custom fabrication business that is NOT being done out of a fly-by-night garage operation! Then you will see what it takes money wise to do this stuff the right way! Also don't just get some quote, get the actual time consuming Top Shelf work and service completed, and then I will be happy to compare pricing with you Don!

Hey Pete, I think Metallica said it best: Kill Em' All! You Dirtbags! Here at the shop we deal with it daily! They have even gone as far as tearing down my fence to steal the chained up Shop Gas BBQ! WTF???????????????????????????????????

And for those of you who know Ken H. (a.k.a. F*ckin' Kenny) here is his latest monster mods! -TCS Billet LT kit -Race Style Rollcage with Aluminum roof -Full mod motor (Big Bore, High Compression, Big Cam, Valve Spring, Carb Kit, ProCircuit Pipe, EPI clutch, Etc......) -Electric actuated HID light rack -Prerunner bumper with HID lights and custom skid plate -Steering wheel -New chrome ITP wheels and Maxxis tires -Etc, Etc......

Here is The OGP Machine's latest adds: -4 seat tilt rear section cage with 2 piece aluminum roof! -Collapsible light rack with (4) 9" HID's and hidden internal wiring! -Beard seats -Removable HUGE icehest rack! -Prerunner front bumper with PIAA offroad lights! -ELKA Elite Resevoir Shocks! -(4) Crow 4 point harness'! -Custom billet stereo and switch plate! -Prewired for tower speakers and dual lighted whips! This is one mean looking machine!!!!! Congratulations Tim! Thanks for your business! I hope you enjoy it!

WOW!!!!! You guys never cease to amaze me! Too expensive???????? Do you ever compare apples to apples? Or just look for something that is priced lower and then spit out, we are to high? Toxic kit is priced on Ebay for $3150 MINUS shocks, axles, and extended stainless braided frt brakelines!!!! -------------------King Shocks=$1700 MINIMUM plus $100 freight --------------Gorilla HD Axles=$1600 MINIMUM plus $100 freight ------SS ext. front Brakelines=$200 --------------------For a total of $6,650 including freight!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! And that "Toxic" kit is probably made out out of mild steel? I'm not sure, but I know it is not 1.25" CNC milled 6061-T6 Billet Aluminum like ours!!!!!! Also it is (qty 16) bushing mounts at the frame, unlike ours which is Chromolly Heim Jointed!!!! Qty. (16) QA1 race car chromolly heims and jam nuts=$800 ALONE! That is also above and beyond what you are comparing our kit to!!!!! I imagine that kit comes raw, as it does not state anything about powdercoating or at least paint? NOW DON'T FORGET, MY PRICE ON OUR KIT TO A DDR MEMBER IS $7500 COMPLETE!!!!!!Plus install! Now, if my math is correct. That is within $50 of the other kit, Which is not apples to apples!!!!!!!! Plus not to mention all the running around you are going to be doing to complete that very basic kit! TIME IS ALSO MONEY!!!!!!!!!!!!! So, who is too expensive????? :mc_smiley: You should be able to see the value in our kit? Not to mention how BAD a$$ it is! Plus customer service....... I'm sorry we can't help all of you! But not wanting to spend your money and blaming it on "We are Too Expensive"...Just does not apply! Especially if you guys that use this excuse really compare what you get from us Vs. the other guys! If you don't like our location, smell, looks, hours of operation, etc. Then I can understand! And I will work on that for you! But we are always priced FAIR!!!!!!!!! P.S. Add the price of powdercoating to that kit and how much does it cost you now????????

We don't want to increase the tire diameter too much to sacrifice power! We may go back to standard offset wheels?

If it has 4 wheels! You just have to jump it!!!!