Need a mechanics "ear" in Henderson or close.

sandawg · November 12, 2008

:black: I wanted to take my rail to Dave at the buggy place here in Henderson to listen to my motor. Unfortunately he is out of town on personal business. Does anyone know of someone in Henderson or close that might be able to listen to this motor and tell me if is OK to take to Dumont on Turkey day. I'm not used to this motor yet and it has a noise that may be nothing or something that needs to be corrected. Any help would be appreciated.

If this doesn't work out I may trailer it to town and see if Butches will listen to it for me. Would like to avoid that if possible. :booty: :lol: :lol: :beercheers: :censored: :kitty:

Thanks,

:broke: Guy!

Ooo · November 12, 2008

:black: I wanted to take my rail to Dave at the buggy place here in Henderson to listen to my motor. Unfortunately he is out of town on personal business. Does anyone know of someone in Henderson or close that might be able to listen to this motor and tell me if is OK to take to Dumont on Turkey day. I'm not used to this motor yet and it has a noise that may be nothing or something that needs to be corrected. Any help would be appreciated.

If this doesn't work out I may trailer it to town and see if Butches will listen to it for me. Would like to avoid that if possible. :kitty:

Thanks,

Guy!

Not in henderson, but Bill Shapley NV Automotive

HTownPerformance · November 12, 2008

We have quite a bit of knowledge with VWs, you can bring it down to us. We will not charge you to just listen to the engine. Give us a call 702-564-7306 H Town Performance ask for Marv

sandawg · November 12, 2008

We have quite a bit of knowledge with VWs, you can bring it down to us. We will not charge you to just listen to the engine. Give us a call 702-564-7306 H Town Performance ask for Marv

Sounds teriffic, I will call tomorrow and make arrangements. Thank You very much!

Pat

OGP · November 12, 2008

Get ahold of 1320. He seems to have all of the answers. He will even be able to tell you how dangerous your new car is. Motor diagnosis and safety check up.

Warrior07 · November 12, 2008

Get ahold of 1320. He seems to have all of the answers. He will even be able to tell you how dangerous your new car is. Motor diagnosis and safety check up.

No he just know's were harnesses need to be placed !! :dunno:

sandawg · November 12, 2008

Get ahold of 1320. He seems to have all of the answers. He will even be able to tell you how dangerous your new car is. Motor diagnosis and safety check up.

The car is safe. I checked it over real close. Now all I worry about is the driver! :flipoff: :dunno: :lol:

Randog · November 12, 2008

The car is safe. I checked it over real close. Now all I worry about is the driver!

Yeah, No Doubt, Worries me too. He can't even spell DOG.

Relax Dog, it's Dawg :black: YOU relax Dawg, it's Dog. :flipoff:

Good luck with your motor mang. :black:

R-

:dunno:

sandawg · November 13, 2008

Yeah, No Doubt, Worries me too. He can't even spell DOG.

Relax Dog, it's Dawg :argue: YOU relax Dawg, it's Dog.

Good luck with your motor mang.

R-

thanks dog,

The long time mechanic and regular at Dumont says to adjust the valves a little tighter and drive it like you stole it. I 'm putting in the ear plugs and drivin it.....damnit!!! :clap: :lol: :think: :lol:

Now all I need is a truck bed stretcher.

Got the Rhino in there today but the rear wheels will sit on the rear bumper. Any one know how much weight that bumper will take. I already have the 26' toy hauler on the end of the truck. I even took off hte frount bumper to get 4 more inches.....Never mind a comment on that one :lol: I could put a 4-12 on there for the wheels to rest on but it would be a b*tch if the buper collapsed!!! then the rear of the Rhino really hangs out there and I don't think it will clear the propane tanks if I turn. Sh*t, Sh*t :black: :black: :lol: Hate like hell to leave the Rhino home!!!

I know, I needed to buy a long bed in the first place.....Save it!!! :dope:

Edited November 13, 2008 by SANDAWG

Randog · November 13, 2008

On the VW motor, I used to set mine all at .004 intake and exhaust.

Firing order is 1-4-3-2

You can check them yourself. Not too difficult to set either once you get the hang of it. :black:

On the loading issue......

Lets say I'll just meet you out there when I go. deal?

I have 4wd, but I can't clear a bumper, rhino and,or what ever else might be falling off dat chit. :flipoff:

Good luck all across the board Dawg.

Be careful and let us know how your trip goes. :lol: :clap: :mc: :mc:

R-

:dunno:

sandawg · November 13, 2008

On the VW motor, I used to set mine all at .004 intake and exhaust.

Firing order is 1-4-3-2

You can check them yourself. Not too difficult to set either once you get the hang of it. :black:

On the loading issue......

Lets say I'll just meet you out there when I go. deal?

I have 4wd, but I can't clear a bumper, rhino and,or what ever else might be falling off dat chit.

Good luck all across the board Dawg.

Be careful and let us know how your trip goes.

R-

I've set them to .006, .004 and now he said go to .002. It's so much fun to do the valves. thanks for the info. :black:

sandawg · November 14, 2008

I've set them to .006, .004 and now he said go to .002. It's so much fun to do the valves. thanks for the info.

Well we can put this post to rest. I have the new rail sounding like a r egular VW now. I reset the valves to .002, pulled out the rush rids and blew them out, turned them around and put it back together. Started it and the noise was there still but when it warmed up it sounds just fine now. Now just a good tune up with a new cap and rotor and points and condensor and we're ready to go!!! :beercheers: :lol: :usa: :clap: :clap: :hello: :hello: :moon: :laughoff: :lol: :old: :thumb: :usa: