rcjunky3 Posted May 29, 2006 Posted May 29, 2006 so since i now have a :headbang: to ride in the dunes who makes flag monts for bikes i remember somebody had a mount that came off of the left side panel so you ended up with a shorty flag maybe it was pauly. i saw it when tims rail broke at the cleanup and they were headed back to camp. thanks for any help guys Quote
rcjunky3 Posted May 29, 2006 Author Posted May 29, 2006 thanks nick thats why i posted on ddr there are always helpfull and informative people on this site. i wonder if that mount would slip in behind my left number plate. i noticed that at the rear of the plate it bubbles out about the size of my finger and looks like a mount could slide in there. do you happen to know what they cost they didnt have any prices posted Quote
RAGDOLL MX Posted May 29, 2006 Posted May 29, 2006 i have a new mount, but i think that it is a bit jenky, so ima going to take it to micar, and have them build a new one for me that makes it a bit easier to change tires and no break flags.. Quote
dunefreak Posted May 30, 2006 Posted May 30, 2006 I have found that a mount on the swingarm isn't the best place because the suspension beats the crap outta the flag and usually breaks. :headbang: My buddy and I fabbed up a mount out of some angle iron and put the mount on the left side of the bike where the seat ends and rear fender begins. It's been on there for about 8 years now and works great. I'll post pics up when I get home. Quote
EY3BA11 Posted May 30, 2006 Posted May 30, 2006 Thats essentially the same thing the flick whip is pete except mounting oustide the fender instead of inside... I had one of his prototypes didnt like the fit but then again it was a prototype and lots of people have gotten them and loved them... Rcjunky when i first talked to him he was saying something about 30 bucks a whack or somewhere in that neighborhood.. Quote
rcjunky3 Posted May 31, 2006 Author Posted May 31, 2006 as far as that "bubble" out of the side panel i went over to a buddies house and he has an 05 yz450f and his side panel is flush with the seat and rear fender. i wonder why they would do that for 06 maybe they guy at flick has it in with somebody at yamaha Quote
PaulyPaul Posted June 15, 2006 Posted June 15, 2006 I pain 40 dollars for it at the sand show 2 years a go great mount... Quote
OGP Posted June 15, 2006 Posted June 15, 2006 (edited) so since i now have a to ride in the dunes who makes flag monts for bikes i remember somebody had a mount that came off of the left side panel so you ended up with a shorty flag maybe it was pauly. i saw it when tims rail broke at the cleanup and they were headed back to camp. thanks for any help guys i saw it when tims rail broke at the cleanup and they were headed back to camp. lol JUST HAD TO BRING UP MY CAR BREAKING dint ya? lol It actually went a whole weekend at coral without even a hickup. Woohoo. I think maybe ive gotten most of the bugs worked out of it. I KNOW I KNOW. OFF TOPIC!!!! Edited June 15, 2006 by ORIGINALPIMP Quote
rcjunky3 Posted June 22, 2006 Author Posted June 22, 2006 off topic tim its ok i wasnt sure whos bike was out there at least that way somebody would know who it was. thanks for the info guys on the flag mount. i just got my sand tires so soon i will be ready to eat some sand on a Quote
RAGDOLL MX Posted July 17, 2006 Posted July 17, 2006 http://flickwhip.com/ i cant get that guy to answer his phone Quote
wingnut Posted July 17, 2006 Posted July 17, 2006 i saw it when tims rail broke at the cleanup and they were headed back to camp. lol JUST HAD TO BRING UP MY CAR BREAKING dint ya? lol It actually went a whole weekend at coral without even a hickup. Woohoo. I think maybe ive gotten most of the bugs worked out of it. I KNOW I KNOW. OFF TOPIC!!!! Thats not true OGP, u need a bigger turbo, derr Quote
EY3BA11 Posted July 17, 2006 Posted July 17, 2006 i cant get that guy to answer his phone He's a punkass flatbiller who happend to use daddy's shop one day and borrow one of his daddy's cnc buddies and whip out a few mounts.. and they caught on... Quote
RAGDOLL MX Posted July 18, 2006 Posted July 18, 2006 He's a punkass flatbiller who happend to use daddy's shop one day and borrow one of his daddy's cnc buddies and whip out a few mounts.. and they caught on... well where else can i get one at? Quote
dunefreak Posted July 18, 2006 Posted July 18, 2006 well where else can i get one at? They are all over the Sand Sports Super Show if you can wait till September. Otherwise call Matt @ S&M Motorsports. He is on the Supporting Vendor list. He can find you one or might even have one. Quote
dunefreak Posted July 18, 2006 Posted July 18, 2006 sweeeeet thanks pete sorry the site on the link kinda sucks in my opinion. He didn't even put his number on the site anywhere! Here is his number directly at the shop. Tell him DDR sent you and he will hook you up. Matt @ S&M...702-565-4193 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.