subie01

white rhino w/ mier plastics,aluminum cage ,aluminum front bumper,aluminum shock towers front and back, aluminum +6 long travel, suspension seats, black bead locks, rear shock tower comes up through the bed 5-6 inches. there is a 5,000.00 dollar reward to the one that can take me to the people that took it or 1,500.00 dollar reward to who can lead me to the finding of my rhino. O-YA , ALL THE ALUMINUM PARTS ON IT ARE ONE OFFS WE MADE ALL OF THESE PARTS IN HOUSE AND THEY ARE ONE OF A KINDS. I HOPE TO FIND MY RHINO AND THE LOW LIFE FAGS WHO TOOK IT !!!!!! CALL ME WITH ANY INFO 327-6966

take it to Pure Evil Racing off of Craig and ? over by abotts shop they have a dyno and know what they are doing.

dune freak is right i have spoken to both sides of the fence. Cali. is cool with a Utah sticker and Utah is cool with a cali. sticker . i went to sand hallow and my sister got a ticket because her bike didn't have a cali. res. sticker and i did. and I have a Honda 450 that is reg. in Utah and Ive been pulled over at dumont and they were cool with the Utah reg. sticker.

I have a 2.5 subie and i go through 5 to 10 gallons a day.

I will be there foooo shooooow!!!!!!

Bro who is buildingyour boat anchors for you first of all.second who told you to do heat cycles for 10 hours.Having a built banshee is like having a full time dune job,they are the most tempramental bikes but when there on there on. I use to be into these money pits real deep and know alot of the ins and outs of these motors if you need some advise or a helping hand on a cheap rebuild let me know. Subie1

Man I had a great time out there this weekend , my car ran great and met some ddr peeps as well. the little flat for that could didn't let me down at the hill until the old gas tank cracked in 5 spots ,I guess the top of comp won the battle after all. Never fear the old red and white will be ready for Halloween and put the pound down on comp.

I'm going to be out there , my wife gave me gas money so i can go. see u guys out there . I'm leaving sat morning and stay-n till Sunday.

sounds like fun, I think its a great idea.Ill be there fo shizel my nizel!!!!!!!!

Fully appreciate the offer but my wife and her friends are doing girls get together for the weekend at the montecarlo. so ive got the kids ,so thanks anyway wont be making this trip.

wieght is 1447lbs its rear engine and 12ft wheel base and 480hp dynoed power. I talked to a guy at funco and he said that I might try a sand blaster 33 w/the pro cut ,but thats an expensive mistake if they dont work right. heres a picture of the car it might help.

the 16.50 that im running has the giant scoopes and im not turning the boost down i have not even been able to to run the second stage on the boost control yet so theres no turning it down its got to go up!!!!!!!!!!!!!!!!! didnt your dad ever tell you faster is better.and i dont mean only the chicks. :sophie: :sophie:

IM RUNNING A 16.50 NOW AND AS SOON AS THE CAR COMES ON BOOST THE BACK END DANCES AROUND AAAAAALLLLLLOOOOOOOTTTTTTT. ITS NOT AIR PRESSURE EITHER IVE TRIED FROM 7PSI TO 25PSI.WHAT GIVES

yosh ive had a 2.0 on 22lbs of boost and it was like a banshee on crack , when it blew up i went to a semi built 2.5 intercooled with a nitrous intercooler fogger in a4 seater now i have a built 2.5 close deck sleeved cranck rods pistons headsported and intercooled on 15lbs of boost and it is to much for the two seater i have now. but either one of the set ups will be more than enough for one of your cars. if you have any ? fill free to hit me up ive been running these motors for 4 years now and have put them together except my built 2.5 that i have now

It will take some time to set up . to much in the front will push the back down and to much in the back will push the front down so you have to find that perfect center point then start to adjust the bypass, softer or harder depending on if she,s bucking or bottoming out to fast.

have the shocks been valved to the wieght of the car ,or you just going with what they came valved at from the king. this makes a big differance.

dont know what it takes to be a baller but I'll give it a shot!!!!!!

I got the car from ashes dad

not anymore!!!!!!!!!!!!!!!!

Heres a few pic of my new car . It didnt do what I was hoping for it only grabbed around ???? on the dyno but it still ran good at dumont the weekend of march 7th.

Ya the sales guy said he payed $24000.00 for it . It was at the new joint on russell and boulder.

foo sholie gona slide thru.

rebel fuels on sahara under the freeway they sale rocket 110, i run it in my car . ive been running it in my car for 3 years as well as all my built bikes.

Savage does make a two seater and he stands by his work im on my 3rd car by savage and getting ready to start my 4th.His web is savagesandcars.biz

I KNOW WHAT IT IS LIKE TO HAVE RELITIVE OR VERY GOOD FRIEND TO BE IN THIS EXACT SITUATION. ALL OF OUR PRAYERS GO OUT TO DANNY AND HIS FAMILY. HAVING FAITH AND BELIEVING IS VERY IMPORTANT AT ATIME LIKE THIS . GET WELL SOON!!!!!