my rail is 580 rwhp on westech dyno. thats around 700 hp at the flywheel . its high maintanence. i do not use an ls1. but im dropping the boost to make mine more user friendly. mine is not glamis hp its the real deal.
i only write this to let you know first hand its a handfull with that much hp .as written above not a good starting combo nor is a turbo ................
if you can afford it get a 410 ci ls1 with afr heads and a kenny bell blower on pump gas .you can grow into the power. have the ease of pump gas, and when your ready to rock you can get good power out of it. there very smooth on the power band .
every one has differing opinions that would be mine, the kenny bell blower is a very efficient 6 lbs blower so it doesnt give a big hit . with those cubic inches and a small boost its awsom.
if you get anything bigger than a stock ls1 i strongly recomend you step up to a sequential tranny .the 2d will not hold much past 500 flywheel hp and at 450 hp alot of guys are only getting a couple of seasons out of a 2d.
wheelies and jumping are immenent even for an easy driver lol .anything over 600 hp you have to look at albins or mendeolas new sequential .make sure you get 934 axels even if its a stock ls1. micro stubs will eas maintanence.
if you plan on keeping the car and later upgrading keep in mind the trannies all mount different .albins and all 4 mendeolas mount differently. so make sure what you ultimatly want. and put the tranny in accordingly now
or the cost will be crazy later or you will sell and start all over
thats my
im on my 4th buggy and my second lt car for what its worth
alot of these guys can and did (above) give you good advice to. so research before you jump measure twice cut once
p.s. sandsport magazine has a pretty good write up on ls1 motors in this issue pretty cool check it out !!!