Vegashd

are you upset that it has religion on it? or is this an angle your just looking at using? cause if religion bothers you that bad i hope you dont eat at In n Out

So there we were..... at the strip club holding a cardboard sign............ :?:

HAHAHAHAHAHA THese pics are funny..... :moon:

Holy Karma!!!

no kidding? :?:

Sometimes things are just to damn real to be fake.

Started looking for what wheels I wanted to run and of course the wheel I find is discontinued. Just my odds. I found a set of front wheels exactly like I wanted for a SMOKING deal. Front black C series ITP wheels with Sand stars for $100.... YEP BRAND NEW $100. THese retailed for $300 SO before I bought them I HAD to find a set of matching rears. Being I was told they were discontinued I had to found them on someones shelf, which I did!!! Ordered them up and went over and grabbed my new fronts..... They are a little dusty in the pics but they cleaned up VERY NICE Rear wheels should be here next Monday

That is what the fridge is for... LOL!!!! Funny, I too worked at bicycle shops growing up as well. The hack welding jobs, the tires stuffed with tennis balls so they do not need tubes, it never ends.

i know a guy whoh has a BRAND new ishock kit in the nbox for 8 bills..... it wont last long...

I decided to do a semi build up of this 05 TRX450 I picked up a few days ago. I was able to pick this ATV up for $1600. THe motor was blown an in a million pieces. I looked everything over and the tranny was fine but the crank, and top end would have to be replaced. The cylinder was even fine just needed a hone. I talked with a buddy who builds CRF450s for a race team who also happens to be good friends with a couple people at Dasa. SO his knowledge on what I should do was good to have. THe quad had an Ishock front end with A arms which is not something I would purchase to put on it if I was going to do a front end but I will be leaving it for the simple fact that it is on there. It also came with an FMF Full Factory 4 Ti exhaust with Power bomb header. I am selling this as I will be replacing the exhaust. It also had some nerf bars, swingarm skid and Pro Taper bars. I am sure there are things I am not doing the way some of you would and am always open for ideas, opinions, and things that you would not do. Im open to everything. The first misison in order was to get the motor back up and running. This ATV will see the dunes during dune season and make some runs out to the desert quite often as well. I want to build a little more power out of this quad but not over do it. The crank is being replaced with an OEM crank and all bearings and seals in the motor will be replaced as well. THe Piston is I beileve a 12.8:1 or 12.9 I cannot remember which. The Cam will be a Web Cam I believe is what they will be putting in it as well as valves and valve springs made of TI. The Carb is junk I was told and I have an 09 CRF carb being bored out by Dasa and will be backed by a Dasa intake. The Head will have a mild port job being finished off with a Dasa full exhaust. While the motor was already out I decided I will be powdercoating the frame black. I am going to leave the swingarm silver and when I do bumpers and new nerfs they will be black as well. I am going to powder coat the hubs a flame red and run black wheels with white plastic and do custom graphics for my buddies race team. I was originally going to leave the factory headlight but I want to ditch the handlebar controls so I will throw that away and run some billet lights. Correct me if I am wrong but getting rid of my factory headlight on my 05 will allow me to run newer white factory plastics. Today I decided to strip the quad down to drop the frame off at the powder coaters tomorrow morning. I am glad I did this because I found all the interesting idiotic stuff that the previous owner did not do. Considering the motor had problems due to oil issues I am not surprised of what I found. While disassembling the quad I found many things not oiled, tightened properly, lock tighted for no reason and well just plain idiotic crap. The front bushings on the Ishock A-arms were not greased so they were rusted. DO not ask me how in this weather we have out here. We dont get water. LOL. The front bumper was locktighted with RED lock tight. once again, why? The shock bolts were not tightened all the way and were lock tighted a few turns shy of bottoming out so the bold actually had back and forth play in it. One of the brake ferrels was cross threaded when put on causing this to need to be replaced.

well at least the money will be in the bank. SO did he just get your stub then? Either way a lot of info on yoru paystub.

Just need a stock front TRX rim to put on the quad for rolling around. The one on there is flat spotted and does not hold air.

That is Funny :poop: I had an Iphone and ATT. I paid the disconnect fee and threw my Iphone in the garbage. The phone sucked, the service sucked, I switched to Verizon and LOVE IT!!!!

see some of the funniest parts of what led up to this were left out.... well the eating and drinking did not help. But for two hours we were stuck behinbd a Toyota Highlander who was DWA Driving While Asian.. :ah: :blonde: In her defense cars were stuck EVERYWHERE on the road past stateline with no where to get out of the way as the construction had cement barriers on both sides of the road. THe ground was frozen and once stopped you oculd not get going again. So being the great snow driver I am not I am slowly getting around all these drivers who unlike me..... WERE Crapping their pants trying to drive in the mess I finally get to the last car at the front of the line after an hour and a half of doing under 5mph, we get to the woman asian driver. We hear this outrageous loud noise and a motor bouncing off the rev limiter. Her front wheel drive car had the front end sliding instead of driving from side to side through the frozen road. We finally get to where we could see the wheels and this asian had the gas pedal to the floor!!! So what do we do but take and film this funny crap. SHe had a death grip on the steering wheel and pedal to the floor and did not realize that letting off the gas would of allowed her to drive in more control and faster then she was....... SO we finally get around her and the rest area is closed and the store at the next exit is closed. I decide it is now or never... or at least now or in the truck. I get out to do my duty and get in the "not crapping on your dropped drawers" position and well the ground was frozen... out from under me come my feet and I almost hit the deck. By this time Cole is laughing so hard i think he pissed his pants. THe entire time I am trying to gain composure and make sure I did not dribble... YES dribble onto my drawers. SO I pop the hatch and go for the 2nd try. I squat and just get half way through my duty of :poop: which To be honest which is evident by the pictures had the consistency of well.... chocolate pudding. Then all of a sudden I hear a WHOOSH and it was not coming out of my a$$ but the truck. THe Jack reached over and pressed the accelerator to the floor. He had noticeds I was squating behind the tailpipe and my bare sexy thigh was less then 2" from the exhaust. Hotter then a Mother Up I jumped like Santa dropping into a hot fireplace and mother :porn: that douche bag in the truck. Mind you it is snowing, frozen and cold and there is NO ONE around.... or so we thought.... I turn around and coming out of the hills is a guy driving a jeep less then 10 feet from where I am doing my :poop: So what can you do but wave...... SO I did... he had this weird why are you waving at me look on his face. So that is what led up to this incident. Now get Cole to post the DWA vids and we will be set.. LOL

This is funny CRap. When Cole took his off I warned him and Let me tell you. I have to go get pics of the armored on lock down pull starter assembly. I believe he went overboard but I told him when it goes........it goes.... Well Then you called and said you see I was screwing with it and the neighbor was going to help. I about crapped my pants, (I stopped as I knew Cole had a camera somewhere) Anyways and continued to LAUGH my a$$ off at the site of the 5 pieces and spring flying EVERYWHERE....

Nah, I wont rebuild it to stock. I will be doing a JE piston, Dasa bored CRF carb, HRC cam, Dasa exhaust, Factory Crank cause the Wiseco cranks are junk, OEM TI valves, Dasa intake and some other stuff. A bone stock used motor will run you 1500. This will cost me about 1700 to rebuild it the way I WANT to...

Been looking for a YFZ450 to build up and have found some good deals and some people who must be financed up to their a$$ not so good deals... LOL I found a 2005 TRX450R. It had Ishock Aarms and FMF Factory 4 Complete exhaust, Pro Taper bars......AND a blown motor. THe motor was in a million pieces. I looked over the motor and made a parts list of what would be needed yesterday and calle dthe kid back to come look at it again. THey wanted $2000 for the quad as she sat. I offered 1500 knowing I would pay no more then 1700 for it. Loaded it up and off I was for $1600. Most the parts will be upgraded parts in the motor as well as the exhaust will be changed out from the FMF Factory 4 to a Dasa. It will be getting a bored out CRF carb, 12:1 piston, new crank and all rebuilt. Should have most the parts here tomorrow to start reassembling the motor. The graphics are ugly as well as the black plastic. Ill probably go with white plastic. Heres a few pics of the quad. the exhaust and all hardware that will be forsale. It was used for less then 10 minutes

pink cigars for everyone!!

Oh :ah: son of a B!tch..... OGP.... WHY did you have to bring up "the pic"?!!!!!!! :?: SO I saw this and was going to reply why we went the LONG WAY to EL Centro....... But then I see "THE PIC" :poop: Well, when I stop laughing my freaking off... Ill reply again...

Woman drivers,.... :blonde: :blonde:

I personally honestly cannot think there would be that big of a difference on the ride in the sand. They have about a 1/2" lower sidewall on the half, but i dont think that would effect much if anything. Especially in sand.

never seen those graphics before interesting.

I laughed my a$$ off on this one :dumbass:

CREEPY