Adam @ GTP Off Road

It's about 42-43".

$350 for 2 shipped. They do not have the Pigtail cord. These have positive and negative wires coming out. We offer wire kits for $25 that include a switch, relay, and wiring from battery and to the light.

Most of the closed trails had tracks going in them. We found it hard to figure out as you would be going down a trail and not see a closed sign, but then come up to the backside of a closed sign. So basically we were in the closed area not even knowing it. Which sucks, cause you know they will just use this against OHV saying they can't keep us out. The Utah Rangers didn't seem to be a big fan of the BLM closures.

Good to know... that's totally not what they say, but can't be surprised about the government not knowing WTF is going on... lol

this is not the gears, I pulled the cover off as described in my initial post, and could hand spin the gear, but the motor would not actually spin. This is a case of the motor not working. Hoping someone has replaced one and has an idea for motor replacement. The Company that makes this motor was bought out and I found limited info, and no pricing for a direct replacement. Not sure if a $50 ebay replacement would serve my purpose. The "good" pump, or what looked to be, was $220, that I'd rather not spend on this hauler that I plan to get rid of after next season.

I tried to pump from the fuel station today and it was a no-go. Stated the gen to make sure there was enough juice even though the batteries were at 12.6. went back to check and the emergency switch was HOT, and not working, and the wires were pretty hot. Fuse still intact. Tapped, and hit the pump with no luck. Turned things on and off a few times, still nothing. I never pulled the cover to check the gears, so I did that. Released pressure, turned on, still nothing, pulled the cover and the bottom gear, still nothing. I was able to spin the motor gear by hand, and was never able to get the motor to run. I did a search for the motor and couldn't really find a good lead on one. Anyone know where to get one, at a good price?

i didn't think they would let you NOT register. Once you ask for a title they will now you own it, and want you to register. I know before you didn't have to get a title but the registration was required. most other areas, around here, Utah, Cali, Oregon all require OHV Registration anyway, and once it's registered in Nevada you don't need to be registered in the other states. it's more in cali, and they just rob the fund all the time anyway.

we don't camp in the camp ground at Coral... too many rules and the Meadows are free. Pretty sure we will be up there that weekend.

Coral Pink.

You ready for a good light bar Joe? :saywha: We only have a couple light bars for this price, so if anyone is thinking about it, now is the time. There are cheap light bars out there, but trust us when we say they are not all the same. these are a top quality light bar, and we sell them for $300 all day long on Vendor row.

Let's go this weekend Terry. I just don't have a car, but I have a truck that's helpful now. I can't go next weekend, well maybe Sunday.

I bought the F150 thinking it would be good, not knowing that a 5300lb trailer is a huge load of BS, as it really weighs 7000lbs. The F150 made it through a full season with towing heavy, and loaded up with stuff for Vending. the F350 towed this trailer like it was a piece of wood in the bed. Been keeping my eye out for a 5th wheel, but hoping to wait till next year. We should have a vending trailer for next year also, so not sure what that will weigh. Pretty sure this superduty will get the job done though.

I need to sell a bunch of parts to pay for this thing... lol I've been looking at trailers, but still have to buy a 5th wheel hitch to, they ain't cheap. would be nice to find one with a gooseneck on it. Hoping to find a trailer maybe next year... Joeduner's a baller I can't keep up him

2014 F350

hello, we are a vendor here on DDR and offer a nice line of LED light bars. We typically sell a Combo light bar for the 40". Some light bars are better then others, and there is a big difference between CREE and not. Also, many people sell basic lights as CREE and just flat out lie about it. Our 40" light bars are $375, free shipping. I'll even include a FREE set of light bar covers since your here on DDR. They are a $50 value. These are a top quality lights, yes they are imports (like every other light), but we have tested these and sold a ton of them with great results. http://goodtimesproducts.com/product.php?id_product=24

We have a new order coming and can offer a great deal on our 30" CREE LED Light bars. These are the top quality import light bars that Mike and I run on our own vehicles. These are great lights with 14,500 Lumens. This is cash price, local pick up ONLY. Limited QTY available. Shipping and Paypal can be arranged. $245.

Almost Coral Pink Time... Looks like a nice set-up there.

Looking forward to Coral Pink, Lil Sahara (hopefully in June) and St. Anthony (hopefully in September). I also plan on hitting up Florence Oregon with the family when I visit them this summer. Should be a good summer, with some time out of the heat. I past used to the heat, and just want to avoid it whenever possible. the Raptor is almost done with the Ported head now on, and it should be about a 65-68hp bike right now. Only a couple things left to do on it, then I will be adding in a RZR 900 (or 1000) to my stable of vehicles.

I was too late getting SX tickets, and couldn't get any good ones. It worked out as now I have several Events to work that day anyway.

Nice, I missed riding the whole weekend. I know a couple people that hit Amargosa, but I really wanted to hit Dumont but wasn't able to make it happen.

16mph on Saturday with 68* I can live with. I can just sleep Friday night, wind should die down. Sunday looks really good. Amargosa looks worse.

I see wind on Friday, but I would head out after work Friday. Shop has been busy and we are just getting the Vehicles out, and don't want to fall behind. The weather on Saturday/ sunday looks good. the forecasts are wrong a lot out there.

Weather looks like it might be ok this weekend. maybe just some wind Friday. Anyone looking to go out??

The 2 light bars should be pretty good. I have the 20" wired up to the high beams, and with a separate switch that is built into the truck. The 40" is just off a switch. I almost did 2 40" but wasn't really feeling it. We can make 2 work, but the brackets I made wasn't going to allow everything to clear, so just 1 it is... at least for now. I have no plans for anything on the roof. Just don't want to drill into this truck at this point.