raspadoo Posted July 25, 2016 Posted July 25, 2016 Yea we wanted to give glass a shot. Don't forget the sunroof lol gotta be able to see those hard to see spots. As of now were thinking doing the chassis white like our rzr and do matching wraps for both of them. Car looks Sweet! Glass is awesome as long as you and all of your passengers have iron stomachs. Is looks like it may be removable.? Quote
ItsWeeks Posted July 25, 2016 Author Posted July 25, 2016 Well never had a windshield. Wife rode with buddies that have them without problems. If we hate it I will just pull the glass out. Thanks for the compliments. We really trying to do this one right for us. Just gotta get her done for Halloween. Quote
dunefreak Posted July 27, 2016 Posted July 27, 2016 Looks awesome. That body work is impressive! Quote
ItsWeeks Posted September 26, 2016 Author Posted September 26, 2016 Haven't posted on this in a while. Was slowed down for a few months as I was studying and testing for a new position at work. Now that has come and gone been working on getting this thing done. We decided on adding oil coolers for both motor and trans along with a trans pump. Went to the larger aeromotive 1100 fuel pump. Also decided to mount an air pumper that will be up under the dash. We ordered lights from Baja Designs which were 2 10 inch onx6 bars and 2 xl80's all for the bumper. I ordered the front coilovers friday. Once we got the car back we decided on colors and had the body powdercoated and photo's don't do the color justice, they then had silver carbon fiber vinyl laid on the inside by the upholstery shop. The chassis will be silver that the dash and console were done in. Once JAlper gets over her and helps me finish some fab work then we will tear it down and send it to powdercoat and trans will go in for a checkup. Only has a season on it but figure do it now while it's out. Garage is a mess in the photo's, it's due for the reorganization to mess up again in a few days. Quote
dunefreak Posted September 26, 2016 Posted September 26, 2016 Progress! I like it. Man, that is going to look sweet Jason. Good job. Quote
FireKracker Posted October 8, 2016 Posted October 8, 2016 Halloween is fast approaching, do ya think you might have it out there for all to drool? It looks awesome!! Quote
ItsWeeks Posted October 11, 2016 Author Posted October 11, 2016 It is fast approaching. I don't think it's gonna be ready for Halloween as hoped for. Chassis is about to go to powdercoat this week. Trans is at shop for service. Running into an issue finding a local person to wire it, so it may have to go to California. My set date is now by Thanksgiving as we have lots of family and friends coming. Quote
White Rhino Posted October 14, 2016 Posted October 14, 2016 Ah man sadness. I bet you can't wait to get in and rip it. Hell I can't wait for you to rip up the dunes in it lol. Thanksgiving is is close to. Hope to see it out there!! Quote
ItsWeeks Posted October 15, 2016 Author Posted October 15, 2016 Chassis is at powdercoat, trans is getting checked out as a cya. Get it all back and start the mad dash. We definitely can't wait to tear up the dunes with the new car. 3 Quote
ItsWeeks Posted October 21, 2016 Author Posted October 21, 2016 Picked chassis up from powdercoat and once again photo's don't do it justice. Brad at Ram Proline killed it!! Now gotta get it together and off to the wire guy so we can use this thing come Thanksgiving! 1 Quote
dunefreak Posted October 21, 2016 Posted October 21, 2016 That chassis is poppin! It's going to be one helluva car, Jason. Now get to work. haha Quote
ItsWeeks Posted October 26, 2016 Author Posted October 26, 2016 Progress..... Worked on her through the weekend. Should have back to a roller soon. Be held up this weekend as we will be at Dumont. But back to work when we return. 1 Quote
ItsWeeks Posted November 12, 2016 Author Posted November 12, 2016 Some progress photo's. All the plumbing is done. Dash has been with wire guy for a bit. Throw the engine harness and finish wiring it hopefully. 3 Quote
raspadoo Posted November 12, 2016 Posted November 12, 2016 Car looks Legit, keep pushing forward! have a projected finish date yet? Quote
ItsWeeks Posted November 13, 2016 Author Posted November 13, 2016 Trying to take it thanksgiving for it's inaugural shake down. 1 Quote
Bminus2 Posted November 16, 2016 Posted November 16, 2016 That's a man making me proud every day. If anyone can get it done, it's him! Quote
dunefreak Posted November 28, 2016 Posted November 28, 2016 Yeah how did it do this weekend? You get it all together? Quote
ItsWeeks Posted November 29, 2016 Author Posted November 29, 2016 Well my wire guy, family and I worked our asses off so much I lit my hair on fire while test firing. Lol.... but the injectors aren't talking with the computer or I'm missing a wire somewhere because there not pumping fuel into the motor. The motor fires on a little gas or starter fluid so I know it works just gotta figure out this electrical bug. So unfortunately it did not make thanksgiving weekend and I was beyond bummed about it. So were gonna get back to it now that we're home, so we can get it to the buggy friends ride lol. 2 Quote
dunefreak Posted November 29, 2016 Posted November 29, 2016 buggy friends ride Man that's a huge bummer, but you'll get it Jason. So have you checked for power and injector pulse to the injectors and is it not getting injector pulse? I wonder if it is a theft issue with the ECM that is inhibiting the injectors from firing. Is it a new ECM from your last car or the same? Quote
ItsWeeks Posted November 30, 2016 Author Posted November 30, 2016 Well I'm gonna run the car by the tuner's tomorrow and see if he can plug in and tell me where our problem is. At least hopefully it's that easy and a semi easy fix. I need to get this thing done! Quote
19th_AT Posted November 30, 2016 Posted November 30, 2016 Do you at least have pics of it all together?? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.