Sandblasted headlight lenses

[dunefreak]

So most of you may already know this as it is a no-brainer, but some might not be aware.

If you run the factory headlights on your quad and dune your bike (rather than being a camp cruiser like some ), chances are your headlights will get dull as hell over time.

It's pretty easy to do and only takes about 10-15 minutes to get them looking way better.

You can polish the lenses using plastic lense polish. I used Maguiare's PastX Clear Plastic Cleaner & Polish. (about 7 bucks).

What a difference!

[dinicolada]

Cool thanks Pete that looks likeitmade a big differance I'll have to try it some time

[Bound4Dirt]

Good job!

[sanddunesaddict]

Ive used the Mothers Plastic Polish.It works very well also.

[Duneraider]

Xcelent.

[offroadracer]

it does work good i ended up switching out stock lights with ricky stator and Hella's (glass lens) its light daylight at night

[mineurbiz]

Has anyone tried or found another polish to use on the body plastics?

I would like to try and lightly sand out some scratches and see if I can polish it back up.

[Don29palms]

That's good to know that stuff works. I need to do the lenses on my car and my truck.

[wingnut]

My lens on my two wheeler must have gotten really blasted, I don't even c it on the bike!!!

[dunefreak]

My lens on my two wheeler must have gotten really blasted, I don't even c it on the bike!!!

come onnnn!!

[metalalien]

Another trick that works great... a propane torch. I use that to clear mine up. It's more of an art than a science...

[cycoguy]

also if you just have some buffing compound laying around, grab a cotton rag and hand buff in and whipe off, i used to work at a used car lot as a detailer and thats what we did to the head lights on the cars and they turned out great!

[Warrior07]

i found the best headlight protector ( stay in front )