Trailer Door Locks

[dunefreak]

I picked up two of these the other day. They are a great way to protect the latch when a thief tries to cut or pry the latch assembly off- which is how my toyhauler always gets broken into. It covers the part of the latch that the lock goes through. A large pin slides down through the box and through the lock hole of the door latch. Then the barrel lock on the outside locks the pin in place. I had to relocate my handle about a 1/2 inch down, but no biggie.

They were a little pricey ($65 ea), but I didn't care. I want to stop these guys anyway I can. I am tired of my sh*t getting effed up.

BEFORE

AFTER

[cdavego]

THATS NICE PETE THAT SHOULD KEEP SOMEONE OUT

[dunefreak]

THATS NICE PETE THAT SHOULD KEEP SOMEONE OUT

HOPEfully

[Kens Colors]

Looks better too!!!!!!!!

[Don29palms]

Next you'll have to put bars over the windows.

[SandBox_Kid]

Where did ya find those at?

[dunefreak]

Where did ya find those at?

Carson Trailer on Boulder Highway

[vegas style]

i just picked up a enclosed trailer stripped down toy hauler. does anyone use alarms on there trailers? i was going to look into a car type alarm and run it off the deep cell. anyone done this or any other ideas.

i like the look of that lock gives off a vibe that it wouldnt be worth trying to f*** with

[EY3BA11]

ynot has trailer alarms... and steveo can setup an alarm to your house alarm if someone breaks into your trailer the alarm on the house goes off

[dunefreak]

i like the look of that lock gives off a vibe that it wouldnt be worth trying to f*** with

Me too! They look like a..."whoa...screw that" kinda lock. They even work as good as they look too!

[ynot]

i just picked up a enclosed trailer stripped down toy hauler. does anyone use alarms on there trailers? i was going to look into a car type alarm and run it off the deep cell. anyone done this or any other ideas.

i like the look of that lock gives off a vibe that it wouldnt be worth trying to f*** with

If you interested in an alarm system that can be used anywhere and will let you know if the trailer is broken into along with preventing the trailer from being moved contact me.

[vegas style]

cool still setting it up will post some pics soon. and will contact ynot about a alarm soon.

the trailer sets in my side yard with a good ball lock (yea i said ball lock lol ) and my quads arent stored in it. im more worried about on the road- parking lots, hotels, more remote camping.

[MAXDOUT]

I SURE LIKE YOUR AVATAR. WHAT A BRIGHT STAR THERE IN BETWEEN OR IS THAT THE SUN???

[vegas style]

i stole from somewhere off the web. wish i could take credit for taking the pic but i just plain stole it B)

[foolofsand]

just saw this post for the 1st time. have you tried to open then lock with the end of a ball point pen? those round style keys are like the krytonite motorcylce locks that were all recalled and replaced with a key type. if it is the same type of lock, it takes less than 10 seconds to open with the pen. I would check that out, as I wouldnt like you to lose your toys again. go to the krytonite website.

[foolofsand]

just saw this post for the 1st time. have you tried to open then lock with the end of a ball point pen? those round style keys are like the krytonite motorcylce locks that were all recalled and replaced with a key type. if it is the same type of lock, it takes less than 10 seconds to open with the pen. I would check that out, as I wouldnt like you to lose your toys again. go to the krytonite website.

heres the website, if it works. http://thirdrate.com/kryptonite_files/2.mov

ps-I had 4 of them for my motorcylces and krytonite exchanged all them for free a few years ago.

Edited November 2, 2006 by foolofsand

[dunefreak]

just saw this post for the 1st time. have you tried to open then lock with the end of a ball point pen? those round style keys are like the krytonite motorcylce locks that were all recalled and replaced with a key type. if it is the same type of lock, it takes less than 10 seconds to open with the pen. I would check that out, as I wouldnt like you to lose your toys again. go to the krytonite website.

I haven't checked that yet, but I will tonight! Thanks for the heads up. Either way, I am not relying only on locks for security. :fro:

[Vegas FX400]

they use a bic pen, take the ink tube out and it fits right in there, i used to do that to the candy machines at my old job.

[rhino king]

:fro: i got a toy hauler monkey,,dont need locks!!

[rhino king]

I picked up two of these the other day. They are a great way to protect the latch when a thief tries to cut or pry the latch assembly off- which is how my toyhauler always gets broken into. It covers the part of the latch that the lock goes through. A large pin slides down through the box and through the lock hole of the door latch. Then the barrel lock on the outside locks the pin in place. I had to relocate my handle about a 1/2 inch down, but no biggie.

They were a little pricey ($65 ea), but I didn't care. I want to stop these guys anyway I can. I am tired of my sh*t getting effed up. :fro:

BEFORE

AFTER

hey those bolts on the left can un screw right????? like mine unscrew and your in!@!!! I suggest maybe welding those since you paid so much for those locks

[1bad4fiddy]

Where do you guys park you haulers at?? My friend had his brokin into a few weeks ago ....you guys leave the bikes and stuff in them ??

[dunefreak]

Where do you guys park you haulers at?? My friend had his brokin into a few weeks ago ....you guys leave the bikes and stuff in them ??

no, I don't leave ANYTHING of value in mine.

[SandBox_Kid]

Me neither. I'm lucky enough to be able to park mine against a block wall. Next to his domain:

[dunefreak]

Well last night we tried the bic pen trick...and no luck. The pen tube isn't even the same size as the center of the lock. Hopefully this means it can't be picked that way.

[Vegas FX400]

try a smaller tube, or cut the end off of the cap of a papermate pen..............well now that it looks like im a criminal........it was the High School i went to, thats what we learned in shop class...