The problem the guy is having in the original question in the thread was wether or not switching to straight paddles will help with the a$$ end washing out.It will absoloutely stop the a$$ end washing out on you when side hilling.That was what i wasnt real crazy about with v paddles too but they are alot of fun to dune on if you really want to whip the a$$ end around in the corners.In my personal opinion I like these 2 setups if you are going with straight cup duning type tires.Both on crappy Douglas Blue Labels of course.20x10x8 7 or 8 cup extremes,or 20x10x10 7 or 8 cup extremes.I myself would get a 20x10x8 just because like stated earlier it gives you a little more clearance from the rocks and cuts down on bent wheels and gives you better flotation on top of the sand.AS far as running real heavy duty ITP wheels thats killing your performance adding all the rotating mass.For example your sand stars on ITPs I would bet weigh around16-18lbs each or more.A set of 20x10x8 or 20x10x10 on Blue Labels probably weigh about 13lbs each.It doesnt sound like much but 6lbs to 10lbs of rotating mass gone is going to help you alot. I personally havent ever folded up a blue label just from accident free duning.I mean if you hit a rock on the wheel,I dont think many wheels arent going to bend at the point of impact..Also the cup count is very important too if you want get the most out of your tires.On most 450 based quads I would go with 7 cups.Even on the Raptor i would go with 7's,8 max for bolt on mods.After you open up the motor you might want a little more tire.JMO