Vegas250rr Posted February 28, 2010 Posted February 28, 2010 I am looking to get a frame blasted and powder coated (ATC 250r) in town, can anyone recommend a good shop that has reasonable prices, I am looking to have both tasks done by the same person because I do not own a blaster or a compressor capable of handling the job. :atc: Quote
blanco26 Posted February 28, 2010 Posted February 28, 2010 Vegas Powder Coating 4201 W. Oquendo Rd. 702-739-8464. These guys did an amazing job on my banshee frame, rims, and hubs. hit them up you will not be disappointed. Quote
EY3BA11 Posted February 28, 2010 Posted February 28, 2010 PM CaptKllm and see who his shop uses for PC they do a damn good job from what i have seen on Daves bike and products at the shop there. Quote
CaptNkllm Posted February 28, 2010 Posted February 28, 2010 PM CaptKllm and see who his shop uses for PC they do a damn good job from what i have seen on Daves bike and products at the shop there. Duanne at State of the Art Powdercoating 222-4738 Tell him David from Artistic Iron sent you.. he will take care of ya Capt Quote
Raptor0206 Posted February 28, 2010 Posted February 28, 2010 Can he do a chassis? yeah, he has a few pics of sand rail chassis on his site. I searched around with every damn PC place in vegas and he came in the same as one other one. 560 for blast and PC my raptor. everyone else was 600-900 :ahhhhh: Quote
blanco26 Posted February 28, 2010 Posted February 28, 2010 at the vegas powder coat i paid 345. that was to blast the frame, 4 rims, and 4 hubs. Then powder the rims and hubs. then do a sparkle granny smith powder on the banshee frame. And that was a three stage process. first was chrome, then the green, then the clear. Quote
Special K Posted March 1, 2010 Posted March 1, 2010 PCP Powder Coating Plus 3508 West Post Road Las Vegas, NV 89118-3866 (702) 492-2003 ask for Adam or i believe John.....he did my quad and friends banshee......if your doing a generic color they can usually squeeze you in while cooking to too keep the costs down. Quote
2Extreme Posted March 1, 2010 Posted March 1, 2010 Duanne at State of the Art Powdercoating 222-4738 Tell him David from Artistic Iron sent you.. he will take care of ya Capt Thanks to David who gave me this referral. Duane did an awesome job with my 70 parts!! Quote
bstecki Posted March 1, 2010 Posted March 1, 2010 Duanne does a bad a$$ job, We use him for our powder coating at the shop too Quote
nlvredneck Posted April 6, 2010 Posted April 6, 2010 RAM PROLINE, 4685 copper sage st. suite B, lv nv 89115 702-396-4500. there basically at craig and lamb, they do totally bitchin work and blast and pc any and everything. they are behind atv cycle sports. Quote
1320 Posted April 6, 2010 Posted April 6, 2010 I use ram proline too. He does ceramic coating also, for headers, turbos, pistons coats for the crowns and skirts etc..... I take all my turbo systems to him for coating. He can do chassis as well, and car trailers....I saw a trailer he did. Quote
SKINNER Posted April 7, 2010 Posted April 7, 2010 justin at surface effects, took good care of me on my 70 parts, 12 or 14 different parts i cant remember, baked, blasted, and coated for 125 bucks. Quote
toyotadude Posted April 26, 2010 Posted April 26, 2010 I've used both Ram Proline as well as Artistic Powdercoating on Arville between Trop and Flamingo. Both have good prices and workmanship IMO Quote
jalper Posted December 9, 2010 Posted December 9, 2010 Stay Away From Powder Coating Plus - PCP Stay away, I had my chassis done there gave me a dog and pony show telling me that they would sandblast the car then chemically dip the chassis and it would not come off with beating it with a hammer, then they told me no problem doing a it under $2000, two days after i drop the car off they call me up saying it was going to be $3400, so i said I was taking to Brad at Ram-proline (Great Work) so they called me back saying that they can do this for $2800, I start to assemble the car and one of the arms starts to flake, I look and it is a raw brown look, i thought that is odd everthing is sandblasted, I take the arm back and ask them was the car sandblasted, and they told me that they would not do a chassis without sandblasting it. I show them the arm and take a screw driver and the paint peels right off. They pull my paperwork and told me that the chassis was not blasted but it should be fine and that for since the car came in being Raw metal. Everytime i touch the car with a jack or a rock hits it it flakes off. I would stay away, From them It is now called Powder Coating Plus Quote
jalper Posted December 9, 2010 Posted December 9, 2010 PCP Powder Coating Plus 3508 West Post Road Las Vegas, NV 89118-3866 (702) 492-2003 ask for Adam or i believe John.....he did my quad and friends banshee......if your doing a generic color they can usually squeeze you in while cooking to too keep the costs down. If Adam tells you something BRING A RECORDER! Stay away Far AWAY If was a fast $3000 down the tubes will have to have it painted again. Quote
jalper Posted December 9, 2010 Posted December 9, 2010 RAM PROLINE, 4685 copper sage st. suite B, lv nv 89115 702-396-4500. there basically at craig and lamb, they do totally bitchin work and blast and pc any and everything. they are behind atv cycle sports. X100 Quote
CaptNkllm Posted December 9, 2010 Posted December 9, 2010 Stay Away From Powder Coating Plus - PCP Stay away, I had my chassis done there gave me a dog and pony show telling me that they would sandblast the car then chemically dip the chassis and it would not come off with beating it with a hammer, then they told me no problem doing a it under $2000, two days after i drop the car off they call me up saying it was going to be $3400, so i said I was taking to Brad at Ram-proline (Great Work) so they called me back saying that they can do this for $2800, I start to assemble the car and one of the arms starts to flake, I look and it is a raw brown look, i thought that is odd everthing is sandblasted, I take the arm back and ask them was the car sandblasted, and they told me that they would not do a chassis without sandblasting it. I show them the arm and take a screw driver and the paint peels right off. They pull my paperwork and told me that the chassis was not blasted but it should be fine and that for since the car came in being Raw metal. Everytime i touch the car with a jack or a rock hits it it flakes off. I would stay away, From them It is now called Powder Coating Plus I wont even go into my story with Adam.... He is an a$$!! Capt Quote
turbo_bruce Posted December 9, 2010 Posted December 9, 2010 yeah, he has a few pics of sand rail chassis on his site. I searched around with every damn PC place in vegas and he came in the same as one other one. 560 for blast and PC my raptor. everyone else was 600-900 :ahhhhh: wow you guys up there have to pay alot for powder. young gun down in rancho cucamonga ca will blast and powder any color and yes candy to for $150 909 944 4156 Quote
jalper Posted December 9, 2010 Posted December 9, 2010 wow you guys up there have to pay alot for powder. young gun down in rancho cucamonga ca will blast and powder any color and yes candy to for $150 909 944 4156 I agree it is worth the drive, not so much the money as it is to set my expectations, so I am not supprised. Quote
Bumpint Posted December 30, 2010 Posted December 30, 2010 I had really goodluck with www.snailmotorsports.com He is off of CHeyenne and Simmons Quote
Mhale00 Posted December 30, 2010 Posted December 30, 2010 Call Brad at ramproline. He has done my stuff is the past and has my sandcar frame right now and other parts. Honest and GREAT work! Quote
ryan sanders Posted November 29, 2020 Posted November 29, 2020 Check out www.nvpowdercoat.com they have the best pricing and really good quality equipment. I would almost go as fast as saying they are the best Las Vegas powder coating company in town. Quote
dunefreak Posted November 30, 2020 Posted November 30, 2020 It's been 9 years. I don't think he is still looking. lol 2 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.